Installation XB2-Kit

Installation in Hammond XB-2

(This page in english for int'l customers)

Installation in Hammond XB-2 may be performed by any skilled person; no or very little soldering required.

Open XB-2 by loosening 5 big screws on bottom. Removde keyboard by loosening 7 medium sized black screws on bottom and inside organ. Diconnect keyboard from mainboard plug connector.

Remove all boards inside including supporting rails. Retain cables from power supply. Locate pink/black/green/orange strain and separate black/white strain to unused connectors. Cut as pictured and insulate with shrink tube.

Open XB-2 by loosening 5 big screws on bottom. Removde keyboard by loosening 7 medium sized black screws on bottom and inside organ. Diconnect keyboard from mainboard plug connector.

Remove all boards inside including supporting rails. Retain cables from power supply. Locate pink/black/green/orange strain and separate black/white strain to unused connectors. Cut as pictured and insulate with shrink tube.