MIG-LR/S Tube Preamp for Transistor Leslies: Unterschied zwischen den Versionen
Aus KeyboardPartner Wiki
Zur Navigation springenZur Suche springen
Bovist (Diskussion | Beiträge) K (Schützte „MIG-LR/S Tube Preamp for Transistor Leslies“ ([edit=sysop] (unbeschränkt) [move=sysop] (unbeschränkt))) |
Bovist (Diskussion | Beiträge) KKeine Bearbeitungszusammenfassung |
||
| Zeile 2: | Zeile 2: | ||
''']] | ''']] | ||
Due to '''quality issues''' on russian surplus tubes available on the market today, the MIG-LR tube preamp is no longer available by KeyboardPartner. But if you happen to get one of these gems, you can '''make your own MIG-LR''' by etching a PCB and soldering your own parts. | Due to '''quality issues''' on russian surplus tubes available on the market today, the MIG-LR tube preamp is no longer available by KeyboardPartner. But if you happen to get one of these gems, you can '''make your own MIG-LR''' by etching a PCB and soldering your own parts. Tubes 1SH18b and 1SH24b may be used; choose anode resistor (22kOhms to 47kOhms) to yield anode voltage of 12 to 15 V. ICs used are CD4066 and CD4069 (best soundig are from Phillips/NXP). | ||
'''[http://www.keyboardpartner.de/hammond/lesliemods.htm Complete description (old KeyboardPartner site)]''' | '''[http://www.keyboardpartner.de/hammond/lesliemods.htm Complete description (old KeyboardPartner site)]''' | ||
Version vom 19. September 2013, 13:35 Uhr
Due to quality issues on russian surplus tubes available on the market today, the MIG-LR tube preamp is no longer available by KeyboardPartner. But if you happen to get one of these gems, you can make your own MIG-LR by etching a PCB and soldering your own parts. Tubes 1SH18b and 1SH24b may be used; choose anode resistor (22kOhms to 47kOhms) to yield anode voltage of 12 to 15 V. ICs used are CD4066 and CD4069 (best soundig are from Phillips/NXP).
Complete description (old KeyboardPartner site)
Dokumentation/Installation Manual - Download als PDF
(english) Documentation/Installation Manual - Download as PDF
