Installation XB2-Kit: Unterschied zwischen den Versionen
Aus KeyboardPartner Wiki
Zur Navigation springenZur Suche springen
Bovist (Diskussion | Beiträge) |
Bovist (Diskussion | Beiträge) |
||
| Zeile 7: | Zeile 7: | ||
[[Datei:Xb2_01.JPG|400px|thumb|left|'''Open XB-2 by loosening 5 big screws on bottom. Removde keyboard by loosening 7 medium sized black screws on bottom and inside organ. Diconnect keyboard from mainboard plug connector.''']] | [[Datei:Xb2_01.JPG|400px|thumb|left|'''Open XB-2 by loosening 5 big screws on bottom. Removde keyboard by loosening 7 medium sized black screws on bottom and inside organ. Diconnect keyboard from mainboard plug connector.''']] | ||
[[Datei:Xb2_02.JPG|400px|thumb|right|'''Remove all boards inside including supporting rails. Retain cables from power supply. Locate pink/black/green/orange strain and separate black/white strain to unused connectors. Cut as pictured and insulate with shrink tube.''']] | [[Datei:Xb2_02.JPG|400px|thumb|right|'''Remove all boards inside including supporting rails. Retain cables from power supply. Locate pink/black/green/orange strain and separate black/white strain to unused connectors. Cut as pictured and insulate with shrink tube.''']] | ||
[[Datei: | |||
[[Datei: | ---- | ||
[[Datei:Xb2_04.JPG|400px|thumb|left|'''Open XB-2 by loosening 5 big screws on bottom. Removde keyboard by loosening 7 medium sized black screws on bottom and inside organ. Diconnect keyboard from mainboard plug connector.''']] | |||
[[Datei:Xb2_05.JPG|400px|thumb|right|'''Remove all boards inside including supporting rails. Retain cables from power supply. Locate pink/black/green/orange strain and separate black/white strain to unused connectors. Cut as pictured and insulate with shrink tube.''']] | |||
Version vom 11. August 2013, 12:07 Uhr
Installation in Hammond XB-2
(This page in english for int'l customers)
Installation in Hammond XB-2 may be performed by any skilled person; no or very little soldering required.
