HX3.5 DSP Updates: Unterschied zwischen den Versionen
Aus KeyboardPartner Wiki
Zur Navigation springenZur Suche springen
Bovist (Diskussion | Beiträge) (Die Seite wurde neu angelegt: „'''Preliminary''' While organ sound generation is done entirely in hardware (FPGA), the HX3.5 board uses an additional Digital Signal Processor (DSP) for reve…“) |
Bovist (Diskussion | Beiträge) K (Schützte „HX3.5 DSP Updates“ ([Bearbeiten=Nur Administratoren erlauben] (unbeschränkt) [Verschieben=Nur Administratoren erlauben] (unbeschränkt))) |
(kein Unterschied)
| |
Version vom 16. Juli 2018, 12:25 Uhr
Preliminary
While organ sound generation is done entirely in hardware (FPGA), the HX3.5 board uses an additional Digital Signal Processor (DSP) for reverb effects (EFX) and General MIDI voice generation. With an extended HX3 licence, 128 GM sounds are installed as a so-called sound bank. Up to two sound banks can be installed at a time; a second sound bank can contain
At this time, the DSP firmware and DSP soundbank(s) cannot be updated by SD Card; use USB connection instead. Please follow instructions below carefully.
Update by USB
In USB firmware/soundbank update mode, HX3.5 cancels the "MIDI over USB" mode and registers as a DFU-capable device. An updater application named "DreamDFU.exe" (Windows OS only) handles all further USB communication.
