Installation XB2-Kit: Unterschied zwischen den Versionen
Aus KeyboardPartner Wiki
Zur Navigation springenZur Suche springen
Bovist (Diskussion | Beiträge) |
Bovist (Diskussion | Beiträge) |
||
Zeile 17: | Zeile 17: | ||
[[Datei:Xb2_09.JPG|640px|thumb|left|'''Install long 10-pin flat ribbon cable from HX3 PL12 to jack board and long 8-pin flat ribbon cable from LCD interface board to jack board.''']] | [[Datei:Xb2_09.JPG|640px|thumb|left|'''Install long 10-pin flat ribbon cable from HX3 PL12 to jack board and long 8-pin flat ribbon cable from LCD interface board to jack board.''']] | ||
[[Datei:Xb2_10.JPG|640px|thumb|left|'''Install two 3-pin audio cables from HX3 to jack board according to silk screen lettering. Re-install MIDI jack board and connect to 12-pin MIDI bulk connector. Install 2-pin contrast adjust cable from small MIDI adapter board to LCD interface board. Install two 3-pin cables from MIDI adapter board to HX3 MIDI connectors according to silk screen printing. Remark: MIDI adapter board may be integrated on jack board | [[Datei:Xb2_10.JPG|640px|thumb|left|'''Install two 3-pin audio cables from HX3 to jack board according to silk screen lettering. Re-install MIDI jack board and connect to 12-pin MIDI bulk connector. Install 2-pin contrast adjust cable from small MIDI adapter board to LCD interface board. Install two 3-pin cables from MIDI adapter board to HX3 MIDI connectors according to silk screen printing. Remark: MIDI adapter board may be integrated on jack board on future versions, so installation looks different.''']] | ||
That's it! Re-Install keyboard and ground wire, connect keyboard to LCD interface board. |
Version vom 11. August 2013, 13:18 Uhr
Installation in Hammond XB-2
(This page in english for int'l customers)
Installation in Hammond XB-2 may be performed by any skilled person; no or very little soldering required. Please click on picture to enlarge.
That's it! Re-Install keyboard and ground wire, connect keyboard to LCD interface board.