Installation XB2-Kit: Unterschied zwischen den Versionen
Aus KeyboardPartner Wiki
Zur Navigation springenZur Suche springen
Bovist (Diskussion | Beiträge) K (Die Seite wurde neu angelegt: „== Installation in Hammond XB-2 == Installation in Hammond XB-2 may be performed by any skilled person; no or very little soldering required. [[Datei:xb2_1.JPG|…“) |
Bovist (Diskussion | Beiträge) |
||
| Zeile 3: | Zeile 3: | ||
Installation in Hammond XB-2 may be performed by any skilled person; no or very little soldering required. | Installation in Hammond XB-2 may be performed by any skilled person; no or very little soldering required. | ||
[[Datei: | [[Datei:Xb2_1.JPG|400px|thumb|right|'''Open XB-2 by loosening 5 big screws on bottom. Removde keyboard by loosening 7 medium sized black screws on bottom and inside organ. Diconnect keyboard from mainboard plug connector.''']] | ||
''']] | |||
Version vom 11. August 2013, 12:01 Uhr
Installation in Hammond XB-2
Installation in Hammond XB-2 may be performed by any skilled person; no or very little soldering required.
Datei:Xb2 1.JPG
Open XB-2 by loosening 5 big screws on bottom. Removde keyboard by loosening 7 medium sized black screws on bottom and inside organ. Diconnect keyboard from mainboard plug connector.
