XB2-Kit mk3 User Manual - Versionsgeschichte

Bovist: /* Fuctions and Presets */

2018-12-29T10:13:29Z

Fuctions and Presets

← Nächstältere Version		Version vom 29. Dezember 2018, 10:13 Uhr
Zeile 26:		Zeile 26:
	Both '''Pitchbend''' and '''Modulation Wheel''' will send appropriate MIDI data, but will not affect HX3 sound generation due to exactness of its physical model (you won't have pitchwheel on a B3, either; we confess, shaking the XB-2 will not wow the notes generated as the real B3 does).		Both '''Pitchbend''' and '''Modulation Wheel''' will send appropriate MIDI data, but will not affect HX3 sound generation due to exactness of its physical model (you won't have pitchwheel on a B3, either; we confess, shaking the XB-2 will not wow the notes generated as the real B3 does).

	===~~Fuctions~~ and Presets===		===Functions and Presets===

	Buttons below XB-2 keybed got new functions:		Buttons below XB-2 keybed got new functions:

Bovist: /* Edit Mode */

2016-02-04T10:38:16Z

Edit Mode

← Nächstältere Version		Version vom 4. Februar 2016, 10:38 Uhr
Zeile 48:		Zeile 48:
	*'''PRESET 5 (EXTERN LESLIE)''' (D) toggles internal Leslie speaker simulation. Switch to ON if you use an external Leslie or an external rotary simulator. In ON position, internal rotary simulation is disabled and output is a plain organ signal.		*'''PRESET 5 (EXTERN LESLIE)''' (D) toggles internal Leslie speaker simulation. Switch to ON if you use an external Leslie or an external rotary simulator. In ON position, internal rotary simulation is disabled and output is a plain organ signal.
	*'''PRESET 6 (KEY SPLIT)''' (D) activates or suspends manual split (lower to upper) to note "#F". Split setting will remain even after switching off and switching on the split function without holding a key, but only until power-off. '''Only valid for HX3 with ScanCores from Rev. #21''' and up: Keyboard split can now be done with a selectable split point and octave shift for lower manual:		*'''PRESET 6 (KEY SPLIT)''' (D) activates or suspends manual split (lower to upper) to note "#F". Split setting will remain even after switching off and switching on the split function without holding a key, but only until power-off. '''Only valid for HX3 with ScanCores from Rev. #21''' and up: Keyboard split can now be done with a selectable split point and octave shift for lower manual:
	** Press the button of the desired split point on the lower manual, hold while turning Split on: '''Pedal to lower manual''' below note pressed. Or:		** Press the button of the desired split point on the lower manual (connected via MIDI), hold while turning Split on: '''Pedal to lower manual''' below note pressed. Or:
	** Press the button of the desired split point on upper manual, hold while turning Split on: '''Lower to upper manual''' below note pressed. Lower manual is now turned off. Or:		** Press the button of the desired split point on upper manual, hold while turning Split on: '''Lower to upper manual''' below note pressed. Lower manual is now turned off. Or:
	** Press two buttons side by side on upper manual, hold while turning Split on: '''Pedal to upper manual''' below notes pressed. Pedal is now off.		** Press two buttons side by side on upper manual, hold while turning Split on: '''Pedal to upper manual''' below notes pressed. Pedal is now off.

Bovist: /* Edit Mode */

2016-01-30T18:07:54Z

Edit Mode

← Nächstältere Version		Version vom 30. Januar 2016, 18:07 Uhr
Zeile 57:		Zeile 57:
	*'''PRESET 8 (LEAKAGE 0-3)''' (D) steps through generator leakage 0 (brand new organ) to 3 (sleazy organ)		*'''PRESET 8 (LEAKAGE 0-3)''' (D) steps through generator leakage 0 (brand new organ) to 3 (sleazy organ)

	Selected function will be shown in display. Those marked with (D) will be '''saved to power-on defaults''' if it's function button is pressed for more than 2 seconds. Those marked (P) will be saved to current preset when preset is saved.		Selected function will be shown in display. Those marked with (D) will be '''saved to power-on defaults''' if it's function button is pressed for more than 2 seconds. To '''save split point and split mode''', set desired mode as described above and then press PRESET 6 for 2 seconds when in '''Edit mode'''. Those parameters marked (P) will be saved to current preset when preset is saved.

	===Potentiometers===		===Potentiometers===

Bovist: /* Edit Mode */

2016-01-30T18:03:26Z

Edit Mode

← Nächstältere Version		Version vom 30. Januar 2016, 18:03 Uhr
Zeile 53:		Zeile 53:
	** Press three adjacent buttons on upper manual, hold while turning Split on: '''Lower +1 octave to upper manual''' below highest note pressed.		** Press three adjacent buttons on upper manual, hold while turning Split on: '''Lower +1 octave to upper manual''' below highest note pressed.
	** Press four adjacent buttons on upper manual, hold while turning Split on: '''Lower +2 octave to upper manual''' below highest note pressed.		** Press four adjacent buttons on upper manual, hold while turning Split on: '''Lower +2 octave to upper manual''' below highest note pressed.



	*'''PRESET 7 (REVERB 0-3)''' (D) steps through reverb 0 (off), 1, 2 and 3<br>		*'''PRESET 7 (REVERB 0-3)''' (D) steps through reverb 0 (off), 1, 2 and 3<br>

Bovist: /* Edit Mode */

2016-01-30T18:03:11Z

Edit Mode

Bovist: /* Edit Mode */

2016-01-30T18:01:25Z

Edit Mode

← Nächstältere Version		Version vom 30. Januar 2016, 18:01 Uhr
Zeile 47:		Zeile 47:
	*'''PRESET 4 (VIBRATO)''' (P) steps through vibrato setting V1 to C3<br>		*'''PRESET 4 (VIBRATO)''' (P) steps through vibrato setting V1 to C3<br>
	*'''PRESET 5 (EXTERN LESLIE)''' (D) toggles internal Leslie speaker simulation. Switch to ON if you use an external Leslie or an external rotary simulator. In ON position, internal rotary simulation is disabled and output is a plain organ signal.		*'''PRESET 5 (EXTERN LESLIE)''' (D) toggles internal Leslie speaker simulation. Switch to ON if you use an external Leslie or an external rotary simulator. In ON position, internal rotary simulation is disabled and output is a plain organ signal.
	*'''PRESET 6 (KEY SPLIT)''' (D) activates or suspends manual split (lower to upper) to note "#F"~~. Only valid for HX3 with scan cores from Rev. #21 and up: Keyboard split can now be done with a selectable split point and octave shift for lower manual~~.		*'''PRESET 6 (KEY SPLIT)''' (D) activates or suspends manual split (lower to upper) to note "#F".

	* Press the button of the desired split point on the lower manual, hold while turning Split on: '''Pedal to lower manual''' below note pressed. Or:		* Only valid for HX3 with scan cores from Rev. #21 and up: Keyboard split can now be done with a selectable split point and octave shift for lower manual:

			** Press the button of the desired split point on the lower manual, hold while turning Split on: '''Pedal to lower manual''' below note pressed. Or:
	** Press the button of the desired split point on upper manual, hold while turning Split on: '''Lower to upper manual''' below note pressed. Lower manual is now turned off. Or:		** Press the button of the desired split point on upper manual, hold while turning Split on: '''Lower to upper manual''' below note pressed. Lower manual is now turned off. Or:
	** Press two buttons side by side on upper manual, hold while turning Split on: '''Pedal to upper manual''' below notes pressed. Pedal is now off.		** Press two buttons side by side on upper manual, hold while turning Split on: '''Pedal to upper manual''' below notes pressed. Pedal is now off.
	** Press three adjacent buttons on upper manual, hold while turning Split on: '''Lower +1 octave to upper manual''' below highest note pressed.		** Press three adjacent buttons on upper manual, hold while turning Split on: '''Lower +1 octave to upper manual''' below highest note pressed.
	** Press four adjacent buttons on upper manual, hold while turning Split on: '''Lower +2 octave to upper manual''' below highest note pressed.		** Press four adjacent buttons on upper manual, hold while turning Split on: '''Lower +2 octave to upper manual''' below highest note pressed.


	Split setting will remain even after switching off and switching on the split function without holding a key, but only until power-off.		Split setting will remain even after switching off and switching on the split function without holding a key, but only until power-off.

Bovist: /* Edit Mode */

2016-01-30T18:00:01Z

Edit Mode

← Nächstältere Version		Version vom 30. Januar 2016, 18:00 Uhr
Zeile 47:		Zeile 47:
	*'''PRESET 4 (VIBRATO)''' (P) steps through vibrato setting V1 to C3<br>		*'''PRESET 4 (VIBRATO)''' (P) steps through vibrato setting V1 to C3<br>
	*'''PRESET 5 (EXTERN LESLIE)''' (D) toggles internal Leslie speaker simulation. Switch to ON if you use an external Leslie or an external rotary simulator. In ON position, internal rotary simulation is disabled and output is a plain organ signal.		*'''PRESET 5 (EXTERN LESLIE)''' (D) toggles internal Leslie speaker simulation. Switch to ON if you use an external Leslie or an external rotary simulator. In ON position, internal rotary simulation is disabled and output is a plain organ signal.
	*'''PRESET 6 (KEY SPLIT)''' (D) activates or suspends manual split (lower to upper) to note "#F"~~<br>~~		*'''PRESET 6 (KEY SPLIT)''' (D) activates or suspends manual split (lower to upper) to note "#F". Only valid for HX3 with scan cores from Rev. #21 and up: Keyboard split can now be done with a selectable split point and octave shift for lower manual.

			* Press the button of the desired split point on the lower manual, hold while turning Split on: '''Pedal to lower manual''' below note pressed. Or:
			** Press the button of the desired split point on upper manual, hold while turning Split on: '''Lower to upper manual''' below note pressed. Lower manual is now turned off. Or:
			** Press two buttons side by side on upper manual, hold while turning Split on: '''Pedal to upper manual''' below notes pressed. Pedal is now off.
			** Press three adjacent buttons on upper manual, hold while turning Split on: '''Lower +1 octave to upper manual''' below highest note pressed.
			** Press four adjacent buttons on upper manual, hold while turning Split on: '''Lower +2 octave to upper manual''' below highest note pressed.


			Split setting will remain even after switching off and switching on the split function without holding a key, but only until power-off.

	*'''PRESET 7 (REVERB 0-3)''' (D) steps through reverb 0 (off), 1, 2 and 3<br>		*'''PRESET 7 (REVERB 0-3)''' (D) steps through reverb 0 (off), 1, 2 and 3<br>
	*'''PRESET 8 (LEAKAGE 0-3)''' (D) steps through generator leakage 0 (brand new organ) to 3 (sleazy organ)		*'''PRESET 8 (LEAKAGE 0-3)''' (D) steps through generator leakage 0 (brand new organ) to 3 (sleazy organ)

Bovist: /* Potentiometers */

2015-06-23T09:12:56Z

Potentiometers

← Nächstältere Version		Version vom 23. Juni 2015, 09:12 Uhr
Zeile 55:		Zeile 55:
	===Potentiometers===		===Potentiometers===

	Left pot ("Reverb") below keybed becomes the '''Rotary Amp''' simulation volume control. It also affects the 11-pin ~~Leslie volume~~ as the ~~external~~ Leslie output signal is derived inernally from 122 tube amp simulation. Right pot controls overall output volume for audio jacks as well as headphone.		Left pot ("Reverb") below keybed becomes the '''Rotary Amp''' simulation volume control. It also affects the external Leslie volume on 11-pin socket as the Leslie output signal is derived inernally from 122 tube amp simulation. Right pot controls overall output volume for audio jacks as well as headphone.

	===Output Jacks===		===Output Jacks===

Bovist: /* Potentiometers */

2015-06-23T09:11:45Z

Potentiometers

← Nächstältere Version		Version vom 23. Juni 2015, 09:11 Uhr
Zeile 55:		Zeile 55:
	===Potentiometers===		===Potentiometers===

	Left pot ("Reverb") below keybed becomes the ~~Leslie~~ Amp simulation volume control. It also affects the 11-pin Leslie volume as the external Leslie output signal is derived inernally from 122 tube amp simulation. Right pot controls overall output volume for audio jacks as well as headphone.		Left pot ("Reverb") below keybed becomes the '''Rotary Amp''' simulation volume control. It also affects the 11-pin Leslie volume as the external Leslie output signal is derived inernally from 122 tube amp simulation. Right pot controls overall output volume for audio jacks as well as headphone.

	===Output Jacks===		===Output Jacks===

Bovist: /* Edit Mode */

2015-06-22T15:25:39Z

Edit Mode

← Nächstältere Version		Version vom 22. Juni 2015, 15:25 Uhr
Zeile 46:		Zeile 46:
	*'''PRESET 3 (SLOW/FAST)''' (P) toggles percussion SLOW or FAST<br>		*'''PRESET 3 (SLOW/FAST)''' (P) toggles percussion SLOW or FAST<br>
	*'''PRESET 4 (VIBRATO)''' (P) steps through vibrato setting V1 to C3<br>		*'''PRESET 4 (VIBRATO)''' (P) steps through vibrato setting V1 to C3<br>
	*'''PRESET 5 (EXTERN LESLIE)''' (D) toggles internal Leslie simulation ~~ON/OFF~~. Switch to ~~OFF~~ if you use an external Leslie or an external rotary simulator.~~<br>~~		*'''PRESET 5 (EXTERN LESLIE)''' (D) toggles internal Leslie speaker simulation. Switch to ON if you use an external Leslie or an external rotary simulator. In ON position, internal rotary simulation is disabled and output is a plain organ signal.
	*'''PRESET 6 (KEY SPLIT)''' (D) activates or suspends manual split (lower to upper) to note "#F"<br>		*'''PRESET 6 (KEY SPLIT)''' (D) activates or suspends manual split (lower to upper) to note "#F"<br>
	*'''PRESET 7 (REVERB 0-3)''' (D) steps through reverb 0 (off), 1, 2 and 3<br>		*'''PRESET 7 (REVERB 0-3)''' (D) steps through reverb 0 (off), 1, 2 and 3<br>