SWC-60/SQC-60 mk3 (english) - Versionsgeschichte

Bovist: /* T100/T200/T500-Series */

2020-03-12T16:04:21Z

T100/T200/T500-Series

← Nächstältere Version		Version vom 12. März 2020, 16:04 Uhr
Zeile 47:		Zeile 47:
	Placement of transformer might be tricky to avoid hum in preamp or generator notes. Try best position before final installation of cables.		Placement of transformer might be tricky to avoid hum in preamp or generator notes. Try best position before final installation of cables.

	==T100/T200/T500-~~Serie~~==		==T100/T200/T500-Series==

	T-Series organs do have a self-starting motor, connected to a capacitor can. Please change wiring as seen in diagram. The older SQC60 (SWC60 Square) is not suitable.		T-Series organs do have a self-starting motor, connected to a capacitor can. Please change wiring as seen in diagram. The older SQC60 (SWC60 Square) is not suitable.

Bovist: /* T100/T200/T500-Series */

2020-03-12T16:04:09Z

T100/T200/T500-Series

← Nächstältere Version		Version vom 12. März 2020, 16:04 Uhr
Zeile 49:		Zeile 49:
	==T100/T200/T500-Serie==		==T100/T200/T500-Serie==

	T-Series organs do have a self-starting motor, connected to a capacitor can. Please change wiring as seen in diagram.		T-Series organs do have a self-starting motor, connected to a capacitor can. Please change wiring as seen in diagram. The older SQC60 (SWC60 Square) is not suitable.

Bovist: /* US Conversions */

2020-03-12T16:03:17Z

US Conversions

← Nächstältere Version		Version vom 12. März 2020, 16:03 Uhr
Zeile 46:		Zeile 46:

	Placement of transformer might be tricky to avoid hum in preamp or generator notes. Try best position before final installation of cables.		Placement of transformer might be tricky to avoid hum in preamp or generator notes. Try best position before final installation of cables.

			==T100/T200/T500-Serie==

			T-Series organs do have a self-starting motor, connected to a capacitor can. Please change wiring as seen in diagram.


			[[Datei:T500-SWC60.png\|600px]]

	==Hum Supression==		==Hum Supression==

Bovist: /* Hum Supression */

2018-09-05T14:35:08Z

Hum Supression

← Nächstältere Version		Version vom 5. September 2018, 14:35 Uhr
Zeile 51:		Zeile 51:
	[[File:netzfilter.jpg\|200px\|thumb\|right\|'''Mains line filter''']]		[[File:netzfilter.jpg\|200px\|thumb\|right\|'''Mains line filter''']]

	If you ground the SWC60/SQC60 and there is a Leslie with the "death caps" .047uF from each side of AC line to ground '''removed''', you will get a bad hum. We would recommend an encapsulated mains line filter (~~[https://www.digikey.de/product-detail/de/qualtek/851-03-003/Q458-ND/739527~~ like this one]) rated at 3 Amps min. with ground lug connected to organ chassis, inserted into 117V wires from wiring panel to SWC60/SQC60. For Leslies with "death caps" removed, I would also recommend the installation of a line filter into Leslie Amp.		If you ground the SWC60/SQC60 and there is a Leslie with the "death caps" .047uF from each side of AC line to ground '''removed''', you will get a bad hum. We would recommend an encapsulated mains line filter (like this one pictured) rated at 3 Amps min. with ground lug connected to organ chassis, inserted into 117V wires from wiring panel to SWC60/SQC60. For Leslies with "death caps" removed, I would also recommend the installation of a line filter into Leslie Amp.

	==PCC Connection==		==PCC Connection==

Bovist: /* Hum Supression */

2018-09-05T14:34:24Z

Hum Supression

← Nächstältere Version		Version vom 5. September 2018, 14:34 Uhr
Zeile 49:		Zeile 49:
	==Hum Supression==		==Hum Supression==

	[[File:netzfilter.jpg\|~~250px~~\|thumb\|right\|'''Mains line filter''']]		[[File:netzfilter.jpg\|200px\|thumb\|right\|'''Mains line filter''']]

	If you ground the SWC60/SQC60 and there is a Leslie with the "death caps" .047uF from each side of AC line to ground '''removed''', you will get a bad hum. We would recommend an encapsulated mains line filter ([https://www.digikey.de/product-detail/de/qualtek/851-03-003/Q458-ND/739527 like this one]) rated at 3 Amps min. with ground lug connected to organ chassis, inserted into 117V wires from wiring panel to SWC60/SQC60. For Leslies with "death caps" removed, I would also recommend the installation of a line filter into Leslie Amp.		If you ground the SWC60/SQC60 and there is a Leslie with the "death caps" .047uF from each side of AC line to ground '''removed''', you will get a bad hum. We would recommend an encapsulated mains line filter ([https://www.digikey.de/product-detail/de/qualtek/851-03-003/Q458-ND/739527 like this one]) rated at 3 Amps min. with ground lug connected to organ chassis, inserted into 117V wires from wiring panel to SWC60/SQC60. For Leslies with "death caps" removed, I would also recommend the installation of a line filter into Leslie Amp.

Bovist: /* PCC Connection */

2018-09-05T14:33:51Z

PCC Connection

← Nächstältere Version		Version vom 5. September 2018, 14:33 Uhr
Zeile 55:		Zeile 55:
	==PCC Connection==		==PCC Connection==

	[[File:Pccunit.jpg\|400px\|thumb\|right]]		[[File:Pccunit.jpg\|400px\|thumb\|right\|'''PCC attached to SWC60''']]

	The PCC power conditioner controller unit is an optional accessory for remote controlling of our new series of Power Conditioners SWC-60, SQC-60 and SQC-50 mk3. It has a built-in LCD and rotary encoder for simultaneous transposing/tuning in half note or cent steps, i.e to achieve orchestral tuning. Box is attached by RJ45 patch cable (included) to CTRL connector of SWC-60/SQC-60. Controller box may be mounted in reach of organist by velcro tape. '''Always switch organ off before attaching/removing PCC unit!'''		The PCC power conditioner controller unit is an optional accessory for remote controlling of our new series of Power Conditioners SWC-60, SQC-60 and SQC-50 mk3. It has a built-in LCD and rotary encoder for simultaneous transposing/tuning in half note or cent steps, i.e to achieve orchestral tuning. Box is attached by RJ45 patch cable (included) to CTRL connector of SWC-60/SQC-60. Controller box may be mounted in reach of organist by velcro tape. '''Always switch organ off before attaching/removing PCC unit!'''

Bovist: /* Hum Supression */

2018-09-05T14:33:12Z

Hum Supression

← Nächstältere Version		Version vom 5. September 2018, 14:33 Uhr
Zeile 49:		Zeile 49:
	==Hum Supression==		==Hum Supression==

	[[File:netzfilter.jpg\|250px\|thumb\|right\|Mains filter]]		[[File:netzfilter.jpg\|250px\|thumb\|right\|'''Mains line filter''']]

	If you ground the SWC60/SQC60 and there is a Leslie with the "death caps" .047uF from each side of AC line to ground '''removed''', you will get a bad hum. We would recommend an encapsulated mains line filter ([https://www.digikey.de/product-detail/de/qualtek/851-03-003/Q458-ND/739527 like this one]) rated at 3 Amps min. with ground lug connected to organ chassis, inserted into 117V wires from wiring panel to SWC60/SQC60. For Leslies with "death caps" removed, I would also recommend the installation of a line filter into Leslie Amp.		If you ground the SWC60/SQC60 and there is a Leslie with the "death caps" .047uF from each side of AC line to ground '''removed''', you will get a bad hum. We would recommend an encapsulated mains line filter ([https://www.digikey.de/product-detail/de/qualtek/851-03-003/Q458-ND/739527 like this one]) rated at 3 Amps min. with ground lug connected to organ chassis, inserted into 117V wires from wiring panel to SWC60/SQC60. For Leslies with "death caps" removed, I would also recommend the installation of a line filter into Leslie Amp.

Bovist: /* Hum Supression */

2018-09-05T14:32:50Z

Hum Supression

← Nächstältere Version		Version vom 5. September 2018, 14:32 Uhr
Zeile 49:		Zeile 49:
	==Hum Supression==		==Hum Supression==

	[[File:netzfilter.jpg\|250px\|thumb\|right]]		[[File:netzfilter.jpg\|250px\|thumb\|right\|Mains filter]]

	If you ground the SWC60/SQC60 and there is a Leslie with the "death caps" .047uF from each side of AC line to ground '''removed''', you will get a bad hum. We would recommend an encapsulated mains line filter ([https://www.digikey.de/product-detail/de/qualtek/851-03-003/Q458-ND/739527 like this one]) rated at 3 Amps min. with ground lug connected to organ chassis, inserted into 117V wires from wiring panel to SWC60/SQC60. For Leslies with "death caps" removed, I would also recommend the installation of a line filter into Leslie Amp.		If you ground the SWC60/SQC60 and there is a Leslie with the "death caps" .047uF from each side of AC line to ground '''removed''', you will get a bad hum. We would recommend an encapsulated mains line filter ([https://www.digikey.de/product-detail/de/qualtek/851-03-003/Q458-ND/739527 like this one]) rated at 3 Amps min. with ground lug connected to organ chassis, inserted into 117V wires from wiring panel to SWC60/SQC60. For Leslies with "death caps" removed, I would also recommend the installation of a line filter into Leslie Amp.

Bovist: /* Hum Supression */

2018-09-05T14:31:59Z

Hum Supression

← Nächstältere Version		Version vom 5. September 2018, 14:31 Uhr
Zeile 49:		Zeile 49:
	==Hum Supression==		==Hum Supression==

	[[File:netzfilter.jpg\|~~450px~~\|thumb\|right]]		[[File:netzfilter.jpg\|250px\|thumb\|right]]

	If you ground the SWC60/SQC60 and there is a Leslie with the "death caps" .047uF from each side of AC line to ground '''removed''', you will get a bad hum. We would recommend an encapsulated mains line filter ([https://www.digikey.de/product-detail/de/qualtek/851-03-003/Q458-ND/739527 like this one]) rated at 3 Amps min. with ground lug connected to organ chassis, inserted into 117V wires from wiring panel to SWC60/SQC60. For Leslies with "death caps" removed, I would also recommend the installation of a line filter into Leslie Amp.		If you ground the SWC60/SQC60 and there is a Leslie with the "death caps" .047uF from each side of AC line to ground '''removed''', you will get a bad hum. We would recommend an encapsulated mains line filter ([https://www.digikey.de/product-detail/de/qualtek/851-03-003/Q458-ND/739527 like this one]) rated at 3 Amps min. with ground lug connected to organ chassis, inserted into 117V wires from wiring panel to SWC60/SQC60. For Leslies with "death caps" removed, I would also recommend the installation of a line filter into Leslie Amp.

Bovist am 5. September 2018 um 14:31 Uhr

2018-09-05T14:31:42Z

← Nächstältere Version		Version vom 5. September 2018, 14:31 Uhr
Zeile 48:		Zeile 48:

	==Hum Supression==		==Hum Supression==

			[[File:netzfilter.jpg\|450px\|thumb\|right]]

	If you ground the SWC60/SQC60 and there is a Leslie with the "death caps" .047uF from each side of AC line to ground '''removed''', you will get a bad hum. We would recommend an encapsulated mains line filter ([https://www.digikey.de/product-detail/de/qualtek/851-03-003/Q458-ND/739527 like this one]) rated at 3 Amps min. with ground lug connected to organ chassis, inserted into 117V wires from wiring panel to SWC60/SQC60. For Leslies with "death caps" removed, I would also recommend the installation of a line filter into Leslie Amp.		If you ground the SWC60/SQC60 and there is a Leslie with the "death caps" .047uF from each side of AC line to ground '''removed''', you will get a bad hum. We would recommend an encapsulated mains line filter ([https://www.digikey.de/product-detail/de/qualtek/851-03-003/Q458-ND/739527 like this one]) rated at 3 Amps min. with ground lug connected to organ chassis, inserted into 117V wires from wiring panel to SWC60/SQC60. For Leslies with "death caps" removed, I would also recommend the installation of a line filter into Leslie Amp.