Legacy Board - Versionsgeschichte

Bovist: /* OEM Preamp/Ctrl Output PL9 */

2025-11-08T16:21:29Z

OEM Preamp/Ctrl Output PL9

← Nächstältere Version		Version vom 8. November 2025, 16:21 Uhr
Zeile 330:		Zeile 330:
	\|-		\|-
	!7		!7
	\|~~unbenutzt~~		\|unused
	\|-		\|-
	!8		!8

Bovist: /* Usage */

2025-10-27T13:45:34Z

Usage

← Nächstältere Version		Version vom 27. Oktober 2025, 13:45 Uhr
Zeile 13:		Zeile 13:


	'''Please note:''' On HX3.7 LegacyBoard, the ''internal'' analog inputs '''PL2 ANLG UPR''' and '''PL3 ANLG LWR''' are emulated by ''external'' analog MPX inputs (starting at param #5024 in HX3 Editor). Analog input assignments #5000 to #5023 '''do not exist on HX3.7''', even with LegacyBoard connected. The parameters #5024 to #5047 are responsible instead.		'''Please note:''' On HX3.7 LegacyBoard, the ''internal'' analog inputs '''PL2 ANLG UPR''' and '''PL3 ANLG LWR''' are emulated by ''external'' analog MPX inputs (starting at param #5024 in HX3 Editor). Analog input assignments #5000 to #5023 '''do not exist on HX3.7''', even with LegacyBoard connected. The parameters #5024 to #5047 are responsible instead. Set parameter #5000 to 255 (end of table marker) to avoid floating values.

	==Analog Inputs==		==Analog Inputs==

Bovist: /* Usage */

2025-10-27T11:54:05Z

Usage

← Nächstältere Version		Version vom 27. Oktober 2025, 11:54 Uhr
Zeile 3:		Zeile 3:
	==Usage==		==Usage==

	As HX3.7 does no longer offer legacy analog and switch inputs, the '''HX3.7 LegacyBoard''' ~~will be~~ available to connect existing passive switch/button boards like Panel16 (2x8 = 16 inputs, two 10-pin headers), analog drawbar controls (2x12 = 24 inputs, two 16-pin headers) and a 6-way rotary vibrato switch (10-pin header). It provides the box headers of previous mainboards for up to 24 drawbars, 16 buttons/switches and vibrato rotary switch.<span style="color:red> The LegacyBoard '''is not needed''' for new installations using the MPX bus/connector (all DBX/PTX/ANX boards).</span> LegacyBoard '''PL1/PL5''' connect to HX3.7 '''PL31 PANEL I2C''' and '''PL32 ANLG MPX''' box headers as seen in picture. Route-through box headers ('''PL4/PL10''', right) are provided for both, allowing easy daisy-chaining to MenuPanel or additional input boards.		As HX3.7 does no longer offer legacy analog and switch inputs, the '''[https://shop.keyboardpartner.de/p/hx3-7-legacyboard HX3.7 LegacyBoard]''' is available to connect existing passive switch/button boards like Panel16 (2x8 = 16 inputs, two 10-pin headers), analog drawbar controls (2x12 = 24 inputs, two 16-pin headers) and a 6-way rotary vibrato switch (10-pin header). It provides the box headers of previous mainboards for up to 24 drawbars, 16 buttons/switches and vibrato rotary switch.<span style="color:red> The LegacyBoard '''is not needed''' for new installations using the MPX bus/connector (all DBX/PTX/ANX boards).</span> LegacyBoard '''PL1/PL5''' connect to HX3.7 '''PL31 PANEL I2C''' and '''PL32 ANLG MPX''' box headers as seen in picture. Route-through box headers ('''PL4/PL10''', right) are provided for both, allowing easy daisy-chaining to MenuPanel or additional input boards.

	Connection of analog and digital controls to HX3.7 LegacyBoard is made in the same way as for [[HX3.6_Installation_Manual#Internal_Analog_Inputs\|'''HX3.6 internal analog inputs''']] and [[HX3.6_Installation_Manual#Connecting_Digital_Inputs\|'''HX3.6 internal digital inputs''']]:		Connection of analog and digital controls to HX3.7 LegacyBoard is made in the same way as for [[HX3.6_Installation_Manual#Internal_Analog_Inputs\|'''HX3.6 internal analog inputs''']] and [[HX3.6_Installation_Manual#Connecting_Digital_Inputs\|'''HX3.6 internal digital inputs''']]:
Zeile 13:		Zeile 13:


	'''Please note:''' On HX3.7 LegacyBoard, the ''internal'' analog inputs '''PL2 ANLG UPR''' and '''PL3 ANLG LWR''' are emulated by ''external'' analog MPX inputs (starting at param #5024 in HX3 Editor). Analog input assignments #5000 to #5023 '''do not exist on HX3.7''', even with LegacyBoard connected. The parameters #5024 to #5047 are responsible instead.		'''Please note:''' On HX3.7 LegacyBoard, the ''internal'' analog inputs '''PL2 ANLG UPR''' and '''PL3 ANLG LWR''' are emulated by ''external'' analog MPX inputs (starting at param #5024 in HX3 Editor). Analog input assignments #5000 to #5023 '''do not exist on HX3.7''', even with LegacyBoard connected. The parameters #5024 to #5047 are responsible instead.

	==Analog Inputs==		==Analog Inputs==

Bovist: /* OEM Preamp/Ctrl Output PL9 */

2025-10-26T13:00:43Z

OEM Preamp/Ctrl Output PL9

← Nächstältere Version		Version vom 26. Oktober 2025, 13:00 Uhr
Zeile 343:		Zeile 343:
	\|}		\|}

	LEDs can be connected directly if a series resistor (e.g., 470 ohms for red LEDs) is provided for each LED.<br>		To use the OEM Control Port PL9, firmware #7.050 and up must be installed. LEDs can be connected directly if a series resistor (e.g., 470 ohms for red LEDs) is provided for each LED.<br>

Bovist: /* OEM Preamp/Ctrl Output PL9 */

2025-10-26T12:59:13Z

OEM Preamp/Ctrl Output PL9

← Nächstältere Version		Version vom 26. Oktober 2025, 12:59 Uhr
Zeile 312:		Zeile 312:
	\|-		\|-
	!1		!1
	\|Upper Secondary ~~Drawbars active (LED+~~)		\|Upper A/B select '''Output''' (High = Secondary DB set)
	\|-		\|-
	!2		!2
	\|Lower Secondary ~~Drawbars active (LED+~~)		\|Lower A/B select '''Output''' (High = Secondary DB set)
	\|-		\|-
	!3		!3

Bovist: /* Connecting Drawbars to PL2 and PL3 */

2025-10-26T12:54:05Z

Connecting Drawbars to PL2 and PL3

← Nächstältere Version		Version vom 26. Oktober 2025, 12:54 Uhr
Zeile 24:		Zeile 24:

	Each analog input can be “soft-wired” (assigned) to any analog function in the “Analog Remap” section of the HX3 Editor. By default, analog functions may be assigned to maintain HX3.4 compatibility as follows:		Each analog input can be “soft-wired” (assigned) to any analog function in the “Analog Remap” section of the HX3 Editor. By default, analog functions may be assigned to maintain HX3.4 compatibility as follows:


	{\|class="wikitable" border="1" cellpadding="4" cellspacing="0" style="text-align:left;width: 50%; background-color:#ffffcc;"		{\|class="wikitable" border="1" cellpadding="4" cellspacing="0" style="text-align:left;width: 50%; background-color:#ffffcc;"

Bovist: /* Connecting Drawbars to PL2 and PL3 */

2025-10-26T12:53:49Z

Connecting Drawbars to PL2 and PL3

← Nächstältere Version		Version vom 26. Oktober 2025, 12:53 Uhr
Zeile 23:		Zeile 23:
	PL2 and PL3 are compatible with the old DB9 and DB12 drawbar boards. You can also use your own or existing drawbars. The resistance value should be in the range of 10 kOhm, linear taper (for example, type B10K). Please note that the use of drawbar potentiometers with a logarithmic characteristic curve, as found in various older LSI and transistor organs, will not result in correct volume and drawbar position on the menu panel.		PL2 and PL3 are compatible with the old DB9 and DB12 drawbar boards. You can also use your own or existing drawbars. The resistance value should be in the range of 10 kOhm, linear taper (for example, type B10K). Please note that the use of drawbar potentiometers with a logarithmic characteristic curve, as found in various older LSI and transistor organs, will not result in correct volume and drawbar position on the menu panel.

	Each analog input can be “soft-wired” (assigned) to any analog function in the “Analog Remap” section of the HX3 Editor. By default, analog functions ~~are~~ assigned to maintain HX3.4 compatibility.		Each analog input can be “soft-wired” (assigned) to any analog function in the “Analog Remap” section of the HX3 Editor. By default, analog functions may be assigned to maintain HX3.4 compatibility as follows:

Bovist: /* Connecting Drawbars to PL2 and PL3 */

2025-10-26T12:53:10Z

Connecting Drawbars to PL2 and PL3

← Nächstältere Version		Version vom 26. Oktober 2025, 12:53 Uhr
Zeile 23:		Zeile 23:
	PL2 and PL3 are compatible with the old DB9 and DB12 drawbar boards. You can also use your own or existing drawbars. The resistance value should be in the range of 10 kOhm, linear taper (for example, type B10K). Please note that the use of drawbar potentiometers with a logarithmic characteristic curve, as found in various older LSI and transistor organs, will not result in correct volume and drawbar position on the menu panel.		PL2 and PL3 are compatible with the old DB9 and DB12 drawbar boards. You can also use your own or existing drawbars. The resistance value should be in the range of 10 kOhm, linear taper (for example, type B10K). Please note that the use of drawbar potentiometers with a logarithmic characteristic curve, as found in various older LSI and transistor organs, will not result in correct volume and drawbar position on the menu panel.

	Each analog input can be “soft-wired” to any analog function in the “Analog Remap” section of the HX3 Editor. By default, analog functions are assigned to maintain HX3.4 compatibility.		Each analog input can be “soft-wired” (assigned) to any analog function in the “Analog Remap” section of the HX3 Editor. By default, analog functions are assigned to maintain HX3.4 compatibility.

Bovist: /* Connecting Drawbars to PL1 and PL2 */

2025-10-26T12:52:45Z

Connecting Drawbars to PL1 and PL2

← Nächstältere Version		Version vom 26. Oktober 2025, 12:52 Uhr
Zeile 17:		Zeile 17:
	==Analog Inputs==		==Analog Inputs==

	=== Connecting Drawbars to ~~PL1~~ and ~~PL2~~ ===		=== Connecting Drawbars to PL2 and PL3 ===

	[[Datei:Wiring_drawbars.png\|300px\|thumb\|right\|'''Drawbar and pot connection to PL2 and PL3 (click picture to enlarge)''']]		[[Datei:Wiring_drawbars.png\|300px\|thumb\|right\|'''Drawbar and pot connection to PL2 and PL3 (click picture to enlarge)''']]

	~~PL1~~ and ~~PL2~~ are compatible with the old DB9 and DB12 drawbar boards. You can also use your own or existing drawbars. The resistance value should be in the range of 10 kOhm, linear taper (for example, type B10K). Please note that the use of drawbar potentiometers with a logarithmic characteristic curve, as found in various older LSI and transistor organs, will not result in correct volume and drawbar position on the menu panel.		PL2 and PL3 are compatible with the old DB9 and DB12 drawbar boards. You can also use your own or existing drawbars. The resistance value should be in the range of 10 kOhm, linear taper (for example, type B10K). Please note that the use of drawbar potentiometers with a logarithmic characteristic curve, as found in various older LSI and transistor organs, will not result in correct volume and drawbar position on the menu panel.

	Each analog input can be “soft-wired” to any analog function in the “Analog Remap” section of the HX3 Editor. By default, analog functions are assigned to maintain HX3.4 compatibility.		Each analog input can be “soft-wired” to any analog function in the “Analog Remap” section of the HX3 Editor. By default, analog functions are assigned to maintain HX3.4 compatibility.

Bovist: /* OEM Preamp/Ctrl Output PL9 */

2025-10-26T11:21:51Z

OEM Preamp/Ctrl Output PL9

← Nächstältere Version		Version vom 26. Oktober 2025, 11:21 Uhr
Zeile 334:		Zeile 334:
	\|-		\|-
	!8		!8
	\|~~Audio Enable~~ (LED+)		\|PowerGood/AudioEnable (LED+)
	\|-		\|-
	!9		!9