HX3 Flash Application - Versionsgeschichte

Bovist: /* HX3 Flash */

2016-05-31T12:17:32Z

HX3 Flash

← Nächstältere Version		Version vom 31. Mai 2016, 12:17 Uhr
Zeile 16:		Zeile 16:
	* '''[https://github.com/keyboardpartner/HX3/blob/master/LATEST/Flash_OrganStandard_mk2.zip?raw=true Flash_OrganStandard_mk2.zip]''' - for HX3 standard organ installations with Panel16 or pushbuttons, older mk2 board		* '''[https://github.com/keyboardpartner/HX3/blob/master/LATEST/Flash_OrganStandard_mk2.zip?raw=true Flash_OrganStandard_mk2.zip]''' - for HX3 standard organ installations with Panel16 or pushbuttons, older mk2 board
	* '''[https://github.com/keyboardpartner/HX3/blob/master/LATEST/Flash_OrganStandard_mk3_4.zip?raw=true Flash_OrganStandard_mk3_4.zip]''' - for HX3 standard organ installations with Panel16 or pushbuttons, current mk3/mk4 versions		* '''[https://github.com/keyboardpartner/HX3/blob/master/LATEST/Flash_OrganStandard_mk3_4.zip?raw=true Flash_OrganStandard_mk3_4.zip]''' - for HX3 standard organ installations with Panel16 or pushbuttons, current mk3/mk4 versions
	* '''[https://github.com/keyboardpartner/HX3/blob/master/LATEST/Flash_OrganUhl.zip?raw=true Flash_OrganUhl.zip]''' - for Uhl Instruments X-2 and X-3 organs
	* '''[https://github.com/keyboardpartner/HX3/blob/master/LATEST/Flash_XB2_mk3.zip?raw=true Flash_XB2_mk3.zip]''' - for newer XB2 kits (stereo rotary sim) with mk3/mk4 boards		* '''[https://github.com/keyboardpartner/HX3/blob/master/LATEST/Flash_XB2_mk3.zip?raw=true Flash_XB2_mk3.zip]''' - for newer XB2 kits (stereo rotary sim) with mk3/mk4 boards

Bovist am 13. Mai 2016 um 20:10 Uhr

2016-05-13T20:10:23Z

← Nächstältere Version		Version vom 13. Mai 2016, 20:10 Uhr
Zeile 1:		Zeile 1:
	[[Datei:Hx3_flash.png\|400px\|thumb\|right\|'''HX3 Flash main window, connection to DrawbarExpander established''']]		[[Datei:Hx3_flash.png\|400px\|thumb\|right\|'''HX3 Flash main window, connection to DrawbarExpander established''']]

	'''Important:''' Some older HX3 Plexi Expanders had been equipped inadvertently with forged FTDI interface boards which apparently came from a shady chinese company. If HX3 Flash fails, please check if you have a '''blue USB interface board''' installed in your HX3 Plexi Expander. We will exchange them at no cost. Red USB interface boards ~~are~~ not affected.		'''Important:''' Some older HX3 Plexi Expanders had been equipped inadvertently with forged FTDI interface boards which apparently came from a shady chinese company. If HX3 Flash fails, please check if you have a '''blue USB interface board''' installed in your HX3 Plexi Expander. We will exchange them at no cost. Red USB interface boards should not be affected.

Bovist am 13. Mai 2016 um 20:09 Uhr

2016-05-13T20:09:23Z

← Nächstältere Version		Version vom 13. Mai 2016, 20:09 Uhr
Zeile 2:		Zeile 2:

	'''Important:''' Some older HX3 Plexi Expanders had been equipped inadvertently with forged FTDI interface boards which apparently came from a shady chinese company. If HX3 Flash fails, please check if you have a '''blue USB interface board''' installed in your HX3 Plexi Expander. We will exchange them at no cost. Red USB interface boards are not affected.		'''Important:''' Some older HX3 Plexi Expanders had been equipped inadvertently with forged FTDI interface boards which apparently came from a shady chinese company. If HX3 Flash fails, please check if you have a '''blue USB interface board''' installed in your HX3 Plexi Expander. We will exchange them at no cost. Red USB interface boards are not affected.


	== HX3 Flash ==		== HX3 Flash ==
Zeile 71:		Zeile 72:
	* Check your serials/licences, user and FW information and indicators near licence fields are both light green, showing "OK". Done.		* Check your serials/licences, user and FW information and indicators near licence fields are both light green, showing "OK". Done.

	''HX3 Flash'' creates a licence backup and a log file (both text format) in its ~~application~~ directory. '''Note for OEMs:''' HX3 Flash might be customized to your specific needs. See wiki page '''[[HX3 Flash for OEMs]]'''.		''HX3 Flash'' creates a licence backup and a log file (both text format) in its own directory. If your HX3 lost its licence information for any reason, you may enter valid licence numbers (and new User Name) before clicking "Update" button. We can create new licences at any time at no cost, just email to info [at] keyboardpartner.de regarding "LICENCE LOST".

			'''Note for OEMs:''' HX3 Flash might be customized to your specific needs. See wiki page '''[[HX3 Flash for OEMs]]'''.

Bovist: /* HX3 Flash */

2016-05-13T20:02:52Z

HX3 Flash

← Nächstältere Version		Version vom 13. Mai 2016, 20:02 Uhr
Zeile 18:		Zeile 18:
	* '''[https://github.com/keyboardpartner/HX3/blob/master/LATEST/Flash_XB2_mk3.zip?raw=true Flash_XB2_mk3.zip]''' - for newer XB2 kits (stereo rotary sim) with mk3/mk4 boards		* '''[https://github.com/keyboardpartner/HX3/blob/master/LATEST/Flash_XB2_mk3.zip?raw=true Flash_XB2_mk3.zip]''' - for newer XB2 kits (stereo rotary sim) with mk3/mk4 boards

	Unzip archive contents to a local folder on your hard disk. It will contain all files needed to update your HX3. Update will fail if started directly from ZIP window. Do only use files contained. Older files or applications may not work.		Unzip archive contents to a local folder on your hard disk. It will contain all files needed to update your HX3. '''Update will fail if started directly from ZIP window. Do only use files contained.''' Older files or applications may not work.

	Note: USB-serial adaptors of other makes will not work with ''HX3 Flash''. Automatic update functions require installed '''HX3 firmware #3.51''' and up. ''HX3 Flash '' will update HX3 boards and expanders with responding firmware, even with corrupted FPGA images or faulty behaviour. In this case, uncheck all '''Restore''' checkboxes prior to '''Update''' click.		Note: USB-serial adaptors of other makes will not work with ''HX3 Flash''. Automatic update functions require installed '''HX3 firmware #3.51''' and up. ''HX3 Flash '' will update HX3 boards and expanders with responding firmware, even with corrupted FPGA images or faulty behaviour. In this case, uncheck all '''Restore''' checkboxes prior to '''Update''' click.

Bovist am 13. Mai 2016 um 20:02 Uhr

2016-05-13T20:02:18Z

← Nächstältere Version		Version vom 13. Mai 2016, 20:02 Uhr
Zeile 18:		Zeile 18:
	* '''[https://github.com/keyboardpartner/HX3/blob/master/LATEST/Flash_XB2_mk3.zip?raw=true Flash_XB2_mk3.zip]''' - for newer XB2 kits (stereo rotary sim) with mk3/mk4 boards		* '''[https://github.com/keyboardpartner/HX3/blob/master/LATEST/Flash_XB2_mk3.zip?raw=true Flash_XB2_mk3.zip]''' - for newer XB2 kits (stereo rotary sim) with mk3/mk4 boards

	Unzip archive contents to a local folder on your hard disk. It will contain all files needed to update your HX3. Do only use files contained. Older files or applications may not work.		Unzip archive contents to a local folder on your hard disk. It will contain all files needed to update your HX3. Update will fail if started directly from ZIP window. Do only use files contained. Older files or applications may not work.

	Note: USB-serial adaptors of other makes will not work with ''HX3 Flash''. Automatic update functions require installed '''HX3 firmware #3.51''' and up. ''HX3 Flash '' will update HX3 boards and expanders with responding firmware, even with corrupted FPGA images or faulty behaviour. In this case, uncheck all '''Restore''' checkboxes prior to '''Update''' click.		Note: USB-serial adaptors of other makes will not work with ''HX3 Flash''. Automatic update functions require installed '''HX3 firmware #3.51''' and up. ''HX3 Flash '' will update HX3 boards and expanders with responding firmware, even with corrupted FPGA images or faulty behaviour. In this case, uncheck all '''Restore''' checkboxes prior to '''Update''' click.

Bovist am 13. Mai 2016 um 19:59 Uhr

2016-05-13T19:59:25Z

← Nächstältere Version		Version vom 13. Mai 2016, 19:59 Uhr
Zeile 1:		Zeile 1:
	[[Datei:Hx3_flash.png\|400px\|thumb\|right\|'''HX3 Flash main window, connection to DrawbarExpander established''']]		[[Datei:Hx3_flash.png\|400px\|thumb\|right\|'''HX3 Flash main window, connection to DrawbarExpander established''']]

			'''Important:''' Some older HX3 Plexi Expanders had been equipped inadvertently with forged FTDI interface boards which apparently came from a shady chinese company. If HX3 Flash fails, please check if you have a '''blue USB interface board''' installed in your HX3 Plexi Expander. We will exchange them at no cost. Red USB interface boards are not affected.

	== HX3 Flash ==		== HX3 Flash ==

Bovist: /* Update Procedure */

2016-05-13T19:52:42Z

Update Procedure

← Nächstältere Version		Version vom 13. Mai 2016, 19:52 Uhr
Zeile 63:		Zeile 63:
	== Update Procedure ==		== Update Procedure ==

	* Click '''Update'''. ''HX3 Flash'' will read previous settings if checkboxes are enabled. Note: Retaining old information may cause problems if current firmware on HX3 is more than .1 version step older than new firmware. If in doubt, uncheck '''Restore Organ Defaults'''. You may have to restore your personal defaults manually by MenuPanel or HX3 Remote.		* Click '''Update'''. ''HX3 Flash'' will read previous settings from board.
	* Firmware update procedure takes about two minutes.		* Firmware update procedure takes about two minutes. If HX3 does not recover from flash process and ''HX3 Flash'' waits for reboot, switch HX3 board off and on again. Leave USB cable connected.
	* After firmware update, ''HX3 Flash'' will restore licence numbers. It will also restore ''Presets'' and ''MIDI CCs'' ~~if corresponding checkbox is enabled~~.		* After firmware update, ''HX3 Flash'' will restore licence numbers. It will also restore ''Presets'' and ''MIDI CCs''.
	* ''HX3 Flash'' checks if FPGA sound engine is up-to-date. If not, it will update all necessary files in HX3. This may take a few minutes.		* ''HX3 Flash'' checks if FPGA sound engine is up-to-date. If not, it will update all necessary files in HX3. This may take a few minutes.
	* Check your serials/licences, user and FW information and indicators near licence fields are both light green, showing "OK". Done.		* Check your serials/licences, user and FW information and indicators near licence fields are both light green, showing "OK". Done.

			''HX3 Flash'' creates a licence backup and a log file (both text format) in its application directory. '''Note for OEMs:''' HX3 Flash might be customized to your specific needs. See wiki page '''[[HX3 Flash for OEMs]]'''.
	'''Note for OEMs:''' HX3 Flash might be customized to your specific needs. See wiki page '''[[HX3 Flash for OEMs]]'''.

Bovist: /* HX3 Flash */

2015-12-28T17:01:50Z

HX3 Flash

← Nächstältere Version		Version vom 28. Dezember 2015, 17:01 Uhr
Zeile 16:		Zeile 16:
	* '''[https://github.com/keyboardpartner/HX3/blob/master/LATEST/Flash_XB2_mk3.zip?raw=true Flash_XB2_mk3.zip]''' - for newer XB2 kits (stereo rotary sim) with mk3/mk4 boards		* '''[https://github.com/keyboardpartner/HX3/blob/master/LATEST/Flash_XB2_mk3.zip?raw=true Flash_XB2_mk3.zip]''' - for newer XB2 kits (stereo rotary sim) with mk3/mk4 boards

	Unzip archive contents to a local folder on your hard disk. It will contain all files needed to update your HX3.		Unzip archive contents to a local folder on your hard disk. It will contain all files needed to update your HX3. Do only use files contained. Older files or applications may not work.

	Note: USB-serial adaptors of other makes will not work with ''HX3 Flash''. Automatic update functions require installed '''HX3 firmware #3.51''' and up. ''HX3 Flash '' will update HX3 boards and expanders with responding firmware, even with corrupted FPGA images or faulty behaviour. In this case, uncheck all '''Restore''' checkboxes prior to '''Update''' click.		Note: USB-serial adaptors of other makes will not work with ''HX3 Flash''. Automatic update functions require installed '''HX3 firmware #3.51''' and up. ''HX3 Flash '' will update HX3 boards and expanders with responding firmware, even with corrupted FPGA images or faulty behaviour. In this case, uncheck all '''Restore''' checkboxes prior to '''Update''' click.

Bovist: /* HX3 Flash */

2015-12-28T16:59:54Z

HX3 Flash

← Nächstältere Version		Version vom 28. Dezember 2015, 16:59 Uhr
Zeile 3:		Zeile 3:
	== HX3 Flash ==		== HX3 Flash ==

	'''HX3 Flash for Windows''' application (named ''HX3_flash.exe'' in [https://github.com/keyboardpartner/HX3/ Github LATEST] ZIPs) is a "one click solution" to update your '''HX3 mk2/mk3/mk4''' board or expander. You will need an HX3 ~~Expander~~ equipped with USB port, or an USB adaptor cable [http://shop.keyboardpartner.de/epages/13705466.sf/de_DE/?ObjectPath=/Shops/13705466/Products/usbcable FTDI TTL232R 5V], or any USB to serial converter based on FTDI FT232R chipset. We recommend using Windows 7 and newer as it automatically installs FTDI drivers on your computer as needed.		'''HX3 Flash for Windows''' application (named ''HX3_flash.exe'' in [https://github.com/keyboardpartner/HX3/ Github LATEST] ZIPs) is a "one click solution" to update your '''HX3 mk2/mk3/mk4''' board or expander. You will need an HX3 device equipped with USB port, or an USB adaptor cable [http://shop.keyboardpartner.de/epages/13705466.sf/de_DE/?ObjectPath=/Shops/13705466/Products/usbcable FTDI TTL232R 5V], or any USB to serial converter based on FTDI FT232R chipset. We recommend using Windows 7 and newer as it automatically installs FTDI drivers on your computer as needed.

	Download one of the following ZIPs '''appropriate for your instrument''':		Download one of the following ZIPs '''appropriate for your instrument''':

Bovist: /* HX3 Flash */

2015-12-28T16:28:25Z

HX3 Flash

← Nächstältere Version		Version vom 28. Dezember 2015, 16:28 Uhr
Zeile 5:		Zeile 5:
	'''HX3 Flash for Windows''' application (named ''HX3_flash.exe'' in [https://github.com/keyboardpartner/HX3/ Github LATEST] ZIPs) is a "one click solution" to update your '''HX3 mk2/mk3/mk4''' board or expander. You will need an HX3 Expander equipped with USB port, or an USB adaptor cable [http://shop.keyboardpartner.de/epages/13705466.sf/de_DE/?ObjectPath=/Shops/13705466/Products/usbcable FTDI TTL232R 5V], or any USB to serial converter based on FTDI FT232R chipset. We recommend using Windows 7 and newer as it automatically installs FTDI drivers on your computer as needed.		'''HX3 Flash for Windows''' application (named ''HX3_flash.exe'' in [https://github.com/keyboardpartner/HX3/ Github LATEST] ZIPs) is a "one click solution" to update your '''HX3 mk2/mk3/mk4''' board or expander. You will need an HX3 Expander equipped with USB port, or an USB adaptor cable [http://shop.keyboardpartner.de/epages/13705466.sf/de_DE/?ObjectPath=/Shops/13705466/Products/usbcable FTDI TTL232R 5V], or any USB to serial converter based on FTDI FT232R chipset. We recommend using Windows 7 and newer as it automatically installs FTDI drivers on your computer as needed.

	Download one of the following ZIPs appropriate for your ~~Instrument~~:		Download one of the following ZIPs '''appropriate for your instrument''':

	* '''[https://github.com/keyboardpartner/HX3/blob/master/LATEST/Flash_DrawbarExpander.zip?raw=true Flash_DrawbarExpander.zip]''' - for new HX3 DrawbarExpander		* '''[https://github.com/keyboardpartner/HX3/blob/master/LATEST/Flash_DrawbarExpander.zip?raw=true Flash_DrawbarExpander.zip]''' - for new HX3 DrawbarExpander