HX3.5 SD Card Usage - Versionsgeschichte

Bovist: /* INI Scripts */

2018-11-16T13:54:50Z

INI Scripts

← Nächstältere Version		Version vom 16. November 2018, 13:54 Uhr
Zeile 50:		Zeile 50:
	=== INI Script List for Editor and SD Card ===		=== INI Script List for Editor and SD Card ===

	* '''config.ini''' - Sets ~~some~~ parameters according to HX3.5 designation. Will be executed automatically after firmware update.<br>		* '''config.ini''' - Sets parameters according to HX3.5 designation and sets up brief HX3 menu. Will be executed automatically after firmware update.<br>
	* '''_config.ini''' - Renamed file after complete update<br>		* '''_config.ini''' - Renamed file after complete update<br>
			* '''config_a.ini''' - Sets parameters according to HX3.5 designation and sets up elaborate HX3 menu. <br>
	* '''start_dfu.ini''' - Invokes DSP Bootloader for DSP firmware updates (reverb, GM voices) without using the HX3.5 Editor. Start "DreamDFU.exe" application and select DSP firmware file "HX35_5504-FW_xxxx.dfu".		* '''start_dfu.ini''' - Invokes DSP Bootloader for DSP firmware updates (reverb, GM voices) without using the HX3.5 Editor. Start "DreamDFU.exe" application and select DSP firmware file "HX35_5504-FW_xxxx.dfu".
	* '''factory.ini''' - resets all board parameters to fatory defaults. Presets are not affected.		* '''factory.ini''' - resets all board parameters to fatory defaults. Presets are not affected.

Bovist: /* Full Update */

2018-11-16T13:48:24Z

Full Update

← Nächstältere Version		Version vom 16. November 2018, 13:48 Uhr
Zeile 19:		Zeile 19:
	==Full Update==		==Full Update==

	An update by SD card AUTORUN.INI script will always update all files ~~(besides~~ DSP updates which are possible only through HX3.5 Editor and USB connection).		An update by SD card AUTORUN.INI script will always update all files, except DSP updates, which are possible only through HX3.5 Editor and USB connection.

	For updates via SD card any computer with SD card reader may be used (Windows, Mac OS, Linux, Android). Please make sure that all files are located in the card's root (base) directory, HX3.5 will ignore files located in folders or ZIP files! Insert SD card in HX3.5 card adaptor and power up HX3.5 (Reset/Restart). An update will start automatically on power-up when a file called "autorun.ini" is present on SD card.		For updates via SD card any computer with SD card reader may be used (Windows, Mac OS, Linux, Android). Please make sure that all files are located in the card's root (base) directory, HX3.5 will ignore files located in folders or ZIP files! Insert SD card in HX3.5 card adaptor and power up HX3.5 (Reset/Restart). An update will start automatically on power-up when a file called "autorun.ini" is present on SD card.
Zeile 25:		Zeile 25:
	Once the update is completed, this file will be renamed to "_autorun.ini" to prevent further obsolete updates. With new firmware installed, the script "config.ini" is executed (if present), which sets important ''System Init'' parameters for a specific HX3.5 designation.		Once the update is completed, this file will be renamed to "_autorun.ini" to prevent further obsolete updates. With new firmware installed, the script "config.ini" is executed (if present), which sets important ''System Init'' parameters for a specific HX3.5 designation.

	~~'''Important:'''~~ Custom installations of HX3.5 ('''StdOrgan''' Firmware) may require additional parameter settings with [[HX3.5 Editor]] after SD card update as all settings are overwritten by default values. Advanced customers or OEMs may add additional settings to their own INI file to automate this process. Own INI file names must follow the 8.3 DOS naming scheme.		Custom installations of HX3.5 ('''StdOrgan''' Firmware) may require additional parameter settings with [[HX3.5 Editor]] after SD card update as all settings are overwritten by default values. Advanced customers or OEMs may add additional settings to their own INI file to automate this process. Own INI file names must follow the 8.3 DOS naming scheme.

	==INI Scripts==		==INI Scripts==

Bovist: /* Preface */

2018-11-16T13:47:03Z

Preface

← Nächstältere Version		Version vom 16. November 2018, 13:47 Uhr
Zeile 8:		Zeile 8:
	Attach SD card adaptor cable to PL17.		Attach SD card adaptor cable to PL17.

	Firmware images are made available through our '''[https://github.com/keyboardpartner/HX35 HX3.5 ~~Github~~ repository]'''. Unzip and copy all files from appropriate ZIP file "UPDATE" to a local folder or an empty SD or SDHC card, respectively. The folder contains:		Firmware images are made available through our '''[https://github.com/keyboardpartner/HX35 HX3.5 repository]'''. Unzip and copy all files from appropriate ZIP file "UPDATE" to a local folder or an empty SD or SDHC card, respectively. The folder contains:

	* Controller Firmware including EEPROM content (firmware.bin and eeprom.bin), handles user interface behaviour and MIDI CC		* Controller Firmware including EEPROM content (firmware.bin and eeprom.bin), handles user interface behaviour and MIDI CC

Bovist: /* File List */

2018-09-20T08:12:08Z

File List

← Nächstältere Version		Version vom 20. September 2018, 08:12 Uhr
Zeile 111:		Zeile 111:
	'''hx3_main.bin''' - FPGA configuration (Sound Engine)<br>		'''hx3_main.bin''' - FPGA configuration (Sound Engine)<br>
	'''scan.dat''' - Scan Driver (may be either MIDI, Fatar or Scan16/61 type)<br>		'''scan.dat''' - Scan Driver (may be either MIDI, Fatar or Scan16/61 type)<br>
	'''scanmidi.dat''' - Scan Driver for MIDI Input<br>		'''scanmidi.dat''' - Scan Driver for MIDI Input (MIDI Expander, Drawbar Expander)<br>
	'''scansr61.dat''' - Scan Driver for Scan16-Strip and Scan61-Inline boards<br>		'''scansr61.dat''' - Scan Driver for Scan16-Strip and Scan61-Inline boards (StdOrgan)<br>
	'''scanfatr.dat''' - Scan Driver for Fatar keybed and FatarScan2 board<br>		'''scanfatr.dat''' - Scan Driver for Fatar keybed and FatarScan2 board (StdOrgan)<br>
	'''fir_coe.dat''' - Finite Impulse Response filter parameters for rotary horn simulation<br>		'''fir_coe.dat''' - Finite Impulse Response filter parameters for rotary horn simulation<br>
	'''taperX.dat''' - 4 Tapering (key loudness) files for Hammond emulation<br>		'''taperX.dat''' - 4 Tapering (key loudness) files for Hammond emulation<br>
	'''wavesetX.dat''' - 8 WaveSet (generator waveforms) files<br>		'''wavesetX.dat''' - 8 WaveSet (generator waveforms) files<br>

Bovist: /* File List */

2018-09-20T08:11:05Z

File List

← Nächstältere Version		Version vom 20. September 2018, 08:11 Uhr
Zeile 112:		Zeile 112:
	'''scan.dat''' - Scan Driver (may be either MIDI, Fatar or Scan16/61 type)<br>		'''scan.dat''' - Scan Driver (may be either MIDI, Fatar or Scan16/61 type)<br>
	'''scanmidi.dat''' - Scan Driver for MIDI Input<br>		'''scanmidi.dat''' - Scan Driver for MIDI Input<br>
	'''~~scan61~~.dat''' - Scan Driver for Scan16-Strip and Scan61-Inline boards<br>		'''scansr61.dat''' - Scan Driver for Scan16-Strip and Scan61-Inline boards<br>
	'''scanfatr.dat''' - Scan Driver for Fatar keybed and FatarScan2 board<br>		'''scanfatr.dat''' - Scan Driver for Fatar keybed and FatarScan2 board<br>
	'''fir_coe.dat''' - Finite Impulse Response filter parameters for rotary horn simulation<br>		'''fir_coe.dat''' - Finite Impulse Response filter parameters for rotary horn simulation<br>
	'''taperX.dat''' - 4 Tapering (key loudness) files for Hammond emulation<br>		'''taperX.dat''' - 4 Tapering (key loudness) files for Hammond emulation<br>
	'''wavesetX.dat''' - 8 WaveSet (generator waveforms) files<br>		'''wavesetX.dat''' - 8 WaveSet (generator waveforms) files<br>

	~~Note: scan61.dat driver currently under development.~~

Bovist: /* INI Script List for SD Card */

2018-09-19T15:56:02Z

INI Script List for SD Card

← Nächstältere Version		Version vom 19. September 2018, 15:56 Uhr
Zeile 36:		Zeile 36:

	=== INI Script List for SD Card ===		=== INI Script List for SD Card ===

	~~'''INI Scripts (may be started by menu)'''~~

	* '''autorun.ini''' - Invoke complete update process (FPGA Sound Engine, WaveSets, Taperings, Scan Driver and Firmware)<br>		* '''autorun.ini''' - Invoke complete update process (FPGA Sound Engine, WaveSets, Taperings, Scan Driver and Firmware)<br>
Zeile 48:		Zeile 46:
	* '''upd_wave.ini''' - Install WaveSet (generator waveforms) files<br>		* '''upd_wave.ini''' - Install WaveSet (generator waveforms) files<br>

	These scripts need a SD card inserted as they depend on various .DAT and .BIN files contained in SD card ZIP.		These scripts need a SD card inserted as they depend on various .DAT and .BIN files contained in SD card ZIP. These INI Scripts may be started by menu or by HX3.5 Editor.

	=== INI Script List for Editor and SD Card ===		=== INI Script List for Editor and SD Card ===

Bovist: /* INI Script List for SD Card */

2018-09-19T15:55:18Z

INI Script List for SD Card

← Nächstältere Version		Version vom 19. September 2018, 15:55 Uhr
Zeile 39:		Zeile 39:
	'''INI Scripts (may be started by menu)'''		'''INI Scripts (may be started by menu)'''

	'''autorun.ini''' - Invoke complete update process (FPGA Sound Engine, WaveSets, Taperings, Scan Driver and Firmware)<br>		* '''autorun.ini''' - Invoke complete update process (FPGA Sound Engine, WaveSets, Taperings, Scan Driver and Firmware)<br>
	'''_autorun.ini''' - Renamed file after complete update<br>		* '''_autorun.ini''' - Renamed file after complete update<br>
	'''upd_scan.ini''' - Install Scan Driver named "scan.dat" (may be either MIDI, Fatar or Scan16/61)<br>		* '''upd_scan.ini''' - Install Scan Driver named "scan.dat" (may be either MIDI, Fatar or Scan16/61)<br>
	'''upd_midi.ini''' - Install Scan Driver for '''MIDI only''' input<br>		* '''upd_midi.ini''' - Install Scan Driver for '''MIDI only''' input<br>
	'''upd_fatr.ini''' - Install Scan Driver for '''FatarScan2''' scan board<br>		* '''upd_fatr.ini''' - Install Scan Driver for '''FatarScan2''' scan board<br>
	'''upd_sc61.ini''' - Install Scan Driver for '''Scan16 and Scan61''' scan board<br>		* '''upd_sc61.ini''' - Install Scan Driver for '''Scan16 and Scan61''' scan board<br>
	'''upd_tapr.ini''' - Install Tapering (key loudness) files for Hammond emulation<br>		* '''upd_tapr.ini''' - Install Tapering (key loudness) files for Hammond emulation<br>
	'''upd_wave.ini''' - Install WaveSet (generator waveforms) files<br>		* '''upd_wave.ini''' - Install WaveSet (generator waveforms) files<br>

	These scripts need a SD card inserted as they depend on various .DAT and .BIN files contained in SD card ZIP.		These scripts need a SD card inserted as they depend on various .DAT and .BIN files contained in SD card ZIP.

Bovist: /* INI Script List for Editor and SD Card */

2018-09-19T15:54:56Z

INI Script List for Editor and SD Card

← Nächstältere Version		Version vom 19. September 2018, 15:54 Uhr
Zeile 52:		Zeile 52:
	=== INI Script List for Editor and SD Card ===		=== INI Script List for Editor and SD Card ===

	'''config.ini''' - Sets some parameters according to HX3.5 designation. Will be executed automatically after firmware update.<br>		* '''config.ini''' - Sets some parameters according to HX3.5 designation. Will be executed automatically after firmware update.<br>
	'''_config.ini''' - Renamed file after complete update<br>		* '''_config.ini''' - Renamed file after complete update<br>
	'''start_dfu.ini''' - Invokes DSP Bootloader for DSP firmware updates (reverb, GM voices) without using the HX3.5 Editor. Start "DreamDFU.exe" application and select DSP firmware file "HX35_5504-FW_xxxx.dfu".		* '''start_dfu.ini''' - Invokes DSP Bootloader for DSP firmware updates (reverb, GM voices) without using the HX3.5 Editor. Start "DreamDFU.exe" application and select DSP firmware file "HX35_5504-FW_xxxx.dfu".
	'''factory.ini''' - resets all board parameters to fatory defaults. Presets are not affected.		* '''factory.ini''' - resets all board parameters to fatory defaults. Presets are not affected.

	== Creating Your Own INI Scripts ==		== Creating Your Own INI Scripts ==

Bovist: /* INI Script List */

2018-09-19T15:54:15Z

INI Script List

← Nächstältere Version		Version vom 19. September 2018, 15:54 Uhr
Zeile 35:		Zeile 35:
	The effects/GM DSP (firmware, GM sound banks) may be updated through USB only (common for all HX3.5 devices). See page '''[[HX3.5 DSP Updates]]''' for details.		The effects/GM DSP (firmware, GM sound banks) may be updated through USB only (common for all HX3.5 devices). See page '''[[HX3.5 DSP Updates]]''' for details.

	== INI Script List ==		=== INI Script List for SD Card ===

	'''INI Scripts (may be started by menu)'''		'''INI Scripts (may be started by menu)'''
Zeile 41:		Zeile 41:
	'''autorun.ini''' - Invoke complete update process (FPGA Sound Engine, WaveSets, Taperings, Scan Driver and Firmware)<br>		'''autorun.ini''' - Invoke complete update process (FPGA Sound Engine, WaveSets, Taperings, Scan Driver and Firmware)<br>
	'''_autorun.ini''' - Renamed file after complete update<br>		'''_autorun.ini''' - Renamed file after complete update<br>
			'''upd_scan.ini''' - Install Scan Driver named "scan.dat" (may be either MIDI, Fatar or Scan16/61)<br>
			'''upd_midi.ini''' - Install Scan Driver for '''MIDI only''' input<br>
			'''upd_fatr.ini''' - Install Scan Driver for '''FatarScan2''' scan board<br>
			'''upd_sc61.ini''' - Install Scan Driver for '''Scan16 and Scan61''' scan board<br>
			'''upd_tapr.ini''' - Install Tapering (key loudness) files for Hammond emulation<br>
			'''upd_wave.ini''' - Install WaveSet (generator waveforms) files<br>

			These scripts need a SD card inserted as they depend on various .DAT and .BIN files contained in SD card ZIP.

			=== INI Script List for Editor and SD Card ===

	'''config.ini''' - Sets some parameters according to HX3.5 designation. Will be executed automatically after firmware update.<br>		'''config.ini''' - Sets some parameters according to HX3.5 designation. Will be executed automatically after firmware update.<br>
	'''_config.ini''' - Renamed file after complete update<br>		'''_config.ini''' - Renamed file after complete update<br>
	'''~~scanupd~~.ini''' - ~~Install Scan Driver named "scan.dat"~~ (~~may be either MIDI~~, ~~Fatar or Scan16/61~~)~~<br>~~		'''start_dfu.ini''' - Invokes DSP Bootloader for DSP firmware updates (reverb, GM voices) without using the HX3.5 Editor. Start "DreamDFU.exe" application and select DSP firmware file "HX35_5504-FW_xxxx.dfu".
	~~'''scanmidi~~.~~ini'''~~ - ~~Install Scan Driver for '''MIDI only''' input<br>~~		'''factory.ini''' - resets all board parameters to fatory defaults. Presets are not affected.
	'''~~scanfatr~~.ini''' - ~~Install Scan Driver for '''FatarScan2''' scan~~ board~~<br>~~
	~~'''scan61~~.~~ini''' - Install Scan Driver for '''Scan16 and Scan61''' scan board<br>~~		== Creating Your Own INI Scripts ==
	~~'''taperupd.ini''' - Install Tapering (key loudness) files for Hammond emulation<br>~~
	~~'''waveupd.ini''' - Install WaveSet (generator waveforms) files<br>~~

	~~Note:~~ INI scripts contain valid HX3.5 commands as plain text and may be edited with any text editor. HX3.5 command form:		INI scripts contain valid HX3.5 commands as plain text and may be edited with any text editor. HX3.5 command form:

	<parameter1>=<newvalue1>		<parameter1>=<newvalue1>

Bovist: /* Full Update */

2018-09-12T21:12:56Z

Full Update

← Nächstältere Version		Version vom 12. September 2018, 21:12 Uhr
Zeile 21:		Zeile 21:
	An update by SD card AUTORUN.INI script will always update all files (besides DSP updates which are possible only through HX3.5 Editor and USB connection).		An update by SD card AUTORUN.INI script will always update all files (besides DSP updates which are possible only through HX3.5 Editor and USB connection).

	For updates via SD card any computer with SD card reader may be used (Windows, Mac OS, Linux, Android). Please make sure that all files are located in the card's root (base) directory, HX3.5 will ignore files located in folders or ZIP files! Insert SD card in HX3.5 card adaptor and power up HX3.5 (Reset/Restart). An update will start automatically on power-up when a file called "autorun.ini" is present on SD card. Once the update is completed, this file will be renamed to "_autorun.ini" to prevent further obsolete updates.		For updates via SD card any computer with SD card reader may be used (Windows, Mac OS, Linux, Android). Please make sure that all files are located in the card's root (base) directory, HX3.5 will ignore files located in folders or ZIP files! Insert SD card in HX3.5 card adaptor and power up HX3.5 (Reset/Restart). An update will start automatically on power-up when a file called "autorun.ini" is present on SD card.

			Once the update is completed, this file will be renamed to "_autorun.ini" to prevent further obsolete updates. With new firmware installed, the script "config.ini" is executed (if present), which sets important ''System Init'' parameters for a specific HX3.5 designation.

	'''Important:''' Custom installations of HX3.5 ('''StdOrgan''' Firmware) may require additional parameter settings with [[HX3.5 Editor]] after SD card update as all settings are overwritten by default values. Advanced customers or OEMs may add additional settings to their own INI file to automate this process. Own INI file names must follow the 8.3 DOS naming scheme.		'''Important:''' Custom installations of HX3.5 ('''StdOrgan''' Firmware) may require additional parameter settings with [[HX3.5 Editor]] after SD card update as all settings are overwritten by default values. Advanced customers or OEMs may add additional settings to their own INI file to automate this process. Own INI file names must follow the 8.3 DOS naming scheme.