HX3.5 DSP Updates - Versionsgeschichte

Bovist am 31. August 2018 um 15:04 Uhr

2018-08-31T15:04:02Z

← Nächstältere Version		Version vom 31. August 2018, 15:04 Uhr
Zeile 13:		Zeile 13:

	The updater application "DreamDFU.exe" (Windows OS only) handles the DSP communication. Mac unsers, please see section '''DSP Updates on a Mac''' below.		The updater application "DreamDFU.exe" (Windows OS only) handles the DSP communication. Mac unsers, please see section '''DSP Updates on a Mac''' below.

			The update package is available '''[https://github.com/keyboardpartner/HX35/blob/master/DSP%20Update.zip?raw=true in our Github repository]''' as a ZIP archive. Please unpack to a local harddisk folder. DFU mode does not need a driver from Window 7 and up. '''Windows XP''' users: Please direct Windows driver installer to file "dream_dfu_device.inf" in directory "DFU_driver_XP" when Windows requests a driver path after clicking "Start DFU" in HX3.5 Editor's Finalize Window.

	==Firmware Update by USB==		==Firmware Update by USB==

Bovist: /* DSP Updates on a Mac */

2018-08-29T07:55:59Z

DSP Updates on a Mac

← Nächstältere Version		Version vom 29. August 2018, 07:55 Uhr
Zeile 45:		Zeile 45:

	DSP Updates may be performed virtually in the same mannor. There is only one small stumbling block: Each time the connection is closed, you may need to re-assign the USB port to the virtual machine before re-connecting to the HX3.5 system. This happens when DFU ist started in the editor and again when DreamDFU.exe is aborted.		DSP Updates may be performed virtually in the same mannor. There is only one small stumbling block: Each time the connection is closed, you may need to re-assign the USB port to the virtual machine before re-connecting to the HX3.5 system. This happens when DFU ist started in the editor and again when DreamDFU.exe is aborted.
	~~[[HX3.5_Backgrounder#Features]]~~

Bovist: /* DSP Updates on a Mac */

2018-08-28T07:33:12Z

DSP Updates on a Mac

← Nächstältere Version		Version vom 28. August 2018, 07:33 Uhr
Zeile 45:		Zeile 45:

	DSP Updates may be performed virtually in the same mannor. There is only one small stumbling block: Each time the connection is closed, you may need to re-assign the USB port to the virtual machine before re-connecting to the HX3.5 system. This happens when DFU ist started in the editor and again when DreamDFU.exe is aborted.		DSP Updates may be performed virtually in the same mannor. There is only one small stumbling block: Each time the connection is closed, you may need to re-assign the USB port to the virtual machine before re-connecting to the HX3.5 system. This happens when DFU ist started in the editor and again when DreamDFU.exe is aborted.
			[[HX3.5_Backgrounder#Features]]

Bovist am 27. August 2018 um 19:07 Uhr

2018-08-27T19:07:48Z

← Nächstältere Version		Version vom 27. August 2018, 19:07 Uhr
Zeile 1:		Zeile 1:
	[[Datei:dsp_update.png\|400px\|thumb\|right\|'''HX3 DSP Update Application''']]		[[Datei:dsp_update.png\|400px\|thumb\|right\|'''HX3 DSP Update Application''']]

	~~'''Preliminary'''~~

	While organ sound generation is done entirely in hardware (FPGA), the HX3.5 board uses an additional Digital Signal Processor (DSP) for reverb effects (EFX) and General MIDI voice generation. 128 GM sounds are installed as a so-called soundbank. Up to two soundbanks can be installed at a time; with an extended HX3 licence, a second soundbank may contain additional, more elaborated instruments (with same MIDI GM bank and program numbers), which replace the instruments in the first soundbank.		While organ sound generation is done entirely in hardware (FPGA), the HX3.5 board uses an additional Digital Signal Processor (DSP) for reverb effects (EFX) and General MIDI voice generation. 128 GM sounds are installed as a so-called soundbank. Up to two soundbanks can be installed at a time; with an extended HX3 licence, a second soundbank may contain additional, more elaborated instruments (with same MIDI GM bank and program numbers), which replace the instruments in the first soundbank.

Bovist: /* DSP Updates on a Mac */

2018-08-27T14:55:20Z

DSP Updates on a Mac

← Nächstältere Version		Version vom 27. August 2018, 14:55 Uhr
Zeile 46:		Zeile 46:
	We are assuming that you already have the HX3.5 Editor running on your Mac according to the instructions in section '''HX3.5 Editor on a Mac'''.		We are assuming that you already have the HX3.5 Editor running on your Mac according to the instructions in section '''HX3.5 Editor on a Mac'''.

	DSP Updates may be performed virtually in the same mannor. There is only one small stumbling block: Each time the connection is closed, you may need to re-assign the USB port to the virtual machine before re-connecting to the HX3.5 system. This happens when DFU ist started in the editor and again, when DreamDFU.exe is aborted.		DSP Updates may be performed virtually in the same mannor. There is only one small stumbling block: Each time the connection is closed, you may need to re-assign the USB port to the virtual machine before re-connecting to the HX3.5 system. This happens when DFU ist started in the editor and again when DreamDFU.exe is aborted.

Bovist: /* DSP Updates on a Mac */

2018-08-27T14:54:34Z

DSP Updates on a Mac

← Nächstältere Version		Version vom 27. August 2018, 14:54 Uhr
Zeile 46:		Zeile 46:
	We are assuming that you already have the HX3.5 Editor running on your Mac according to the instructions in section '''HX3.5 Editor on a Mac'''.		We are assuming that you already have the HX3.5 Editor running on your Mac according to the instructions in section '''HX3.5 Editor on a Mac'''.

	DSP Updates ~~can~~ be ~~made~~ virtually in the same mannor. There is only one small stumbling block: Each time the connection is closed, you may need to re-assign the USB port to the virtual machine before re-connecting to the HX3.5 system. This happens when DFU ist started in the editor and again, when DreamDFU.exe is aborted.		DSP Updates may be performed virtually in the same mannor. There is only one small stumbling block: Each time the connection is closed, you may need to re-assign the USB port to the virtual machine before re-connecting to the HX3.5 system. This happens when DFU ist started in the editor and again, when DreamDFU.exe is aborted.

Bovist am 27. August 2018 um 14:53 Uhr

2018-08-27T14:53:56Z

← Nächstältere Version		Version vom 27. August 2018, 14:53 Uhr
Zeile 14:		Zeile 14:
	* DSP additional sound bank (file xxxx_0x8050.dfu, refined additional instruments for DSP GM synth)		* DSP additional sound bank (file xxxx_0x8050.dfu, refined additional instruments for DSP GM synth)

	The updater application "DreamDFU.exe" (Windows OS only) handles the DSP communication.		The updater application "DreamDFU.exe" (Windows OS only) handles the DSP communication. Mac unsers, please see section '''DSP Updates on a Mac''' below.

	==Firmware Update by USB==		==Firmware Update by USB==
Zeile 41:		Zeile 41:
	* HX3.5 will revert to MIDI over USB mode.		* HX3.5 will revert to MIDI over USB mode.
	* Click on "Close" in the HX3.5 Editor window, then "Open" to re-establish the MIDI over USB connection.		* Click on "Close" in the HX3.5 Editor window, then "Open" to re-establish the MIDI over USB connection.

			==DSP Updates on a Mac==

			We are assuming that you already have the HX3.5 Editor running on your Mac according to the instructions in section '''HX3.5 Editor on a Mac'''.

			DSP Updates can be made virtually in the same mannor. There is only one small stumbling block: Each time the connection is closed, you may need to re-assign the USB port to the virtual machine before re-connecting to the HX3.5 system. This happens when DFU ist started in the editor and again, when DreamDFU.exe is aborted.

Bovist am 25. August 2018 um 14:53 Uhr

2018-08-25T14:53:13Z

← Nächstältere Version		Version vom 25. August 2018, 14:53 Uhr
Zeile 3:		Zeile 3:
	'''Preliminary'''		'''Preliminary'''

	While organ sound generation is done entirely in hardware (FPGA), the HX3.5 board uses an additional Digital Signal Processor (DSP) for reverb effects (EFX) and General MIDI voice generation. 128 GM sounds are installed as a so-called soundbank. Up to two soundbanks can be installed at a time; with an extended HX3 licence, a second soundbank may contain additional, more elaborated instruments (with same MIDI GM bank and program numbers) which replace the instruments in first soundbank.		While organ sound generation is done entirely in hardware (FPGA), the HX3.5 board uses an additional Digital Signal Processor (DSP) for reverb effects (EFX) and General MIDI voice generation. 128 GM sounds are installed as a so-called soundbank. Up to two soundbanks can be installed at a time; with an extended HX3 licence, a second soundbank may contain additional, more elaborated instruments (with same MIDI GM bank and program numbers), which replace the instruments in the first soundbank.

	~~At this time, the~~ DSP firmware and DSP soundbank(s) ~~cannot~~ be updated ~~by SD Card; use~~ USB connection to PL3 or HX3.5 ~~instead~~. Please ~~follow instructions below carefully~~. The DSP update package consists of the following files:		The DSP firmware and DSP soundbank(s) may be updated via USB connection. Connect USB cable from your PC either to USB mini jack (internally connected to PL3) or HX3.5 B-type USB-Jack. Please note: The USB B-type connector on our discontinued HX3 Extension Board mk4 does not have direct access to the DSP chip and cannot be used for DSP updates, unfortunately.

			The DSP update package consists of the following files:

	* DSP Updater (file DreamDfu.exe for Windows, update by USB connection)		* DSP Updater (file DreamDfu.exe for Windows, update by USB connection)
Zeile 12:		Zeile 14:
	* DSP additional sound bank (file xxxx_0x8050.dfu, refined additional instruments for DSP GM synth)		* DSP additional sound bank (file xxxx_0x8050.dfu, refined additional instruments for DSP GM synth)

	~~==Preparation==~~		The updater application "DreamDFU.exe" (Windows OS only) handles the DSP communication.

	~~In USB firmware/soundbank update mode, HX3.5 cancels the "MIDI over USB" mode and registers as a DFU-capable device. An~~ updater application ~~named~~ "DreamDFU.exe" (Windows OS only) handles ~~all further USB~~ communication.

	* Attach FTDI serial cable to HX3.5 PL19
	* Attach USB cable to HX3.5 Board. PC should recognize a USB MIDI device.
	* Select FT232R cable connection in HX3.5 Editor. If successfull, HX3.5 Editor should read parameters and show actual values.

	==Firmware Update by USB==		==Firmware Update by USB==
Zeile 24:		Zeile 20:
	To update the DSP firmware, proceed as follows:		To update the DSP firmware, proceed as follows:

	* Open '''HX3.5 Editor's Update/Finalize window''' and click "Start DFU". Connected PC will deregister USB MIDI and recognize a DFU device instead.		* Attach USB cable to HX3.5. PC should recognize a USB MIDI device.
			* Open '''HX3.5 Editor's Update/Finalize window''' and click "Start DFU". Connected PC will deregister USB MIDI and recognize a DFU device instead.
	* HX3.5 will show "DSP update (DFU)" on MenuPanel display.		* HX3.5 will show "DSP update (DFU)" on MenuPanel display.
	* Start '''DreamDFU.exe''' and open DSP firmware file "HX35_5504-FW.dfu". '''DreamDFU.exe''' should show a window as seen in picture.		* Start '''DreamDFU.exe''' and open DSP firmware file "HX35_5504-FW.dfu". '''DreamDFU.exe''' should show a window as seen in picture.
Zeile 30:		Zeile 27:
	* When finished, close DreamDFU.exe by clicking on "Abort" or Close button.		* When finished, close DreamDFU.exe by clicking on "Abort" or Close button.
	* HX3.5 will revert to MIDI over USB mode.		* HX3.5 will revert to MIDI over USB mode.
			* Click on "Close" in the HX3.5 Editor window, then "Open" to re-establish the MIDI over USB connection.

	==Soundbank Installation/Update by USB==		==Soundbank Installation/Update by USB==
Zeile 35:		Zeile 33:
	To update/install the "Extended Licence" GM2 soundbank, proceed as follows:		To update/install the "Extended Licence" GM2 soundbank, proceed as follows:

			* Attach USB cable to HX3.5. PC should recognize a USB MIDI device.
	* Open '''HX3.5 Editor's Update/Finalize window''' and click "Start DFU". Connected PC will deregister USB MIDI and recognize a DFU device instead.		* Open '''HX3.5 Editor's Update/Finalize window''' and click "Start DFU". Connected PC will deregister USB MIDI and recognize a DFU device instead.
	* HX3.5 will show "DSP update (DFU)" on MenuPanel display.		* HX3.5 will show "DSP update (DFU)" on MenuPanel display.
Zeile 41:		Zeile 40:
	* Close DreamDFU.exe by clicking on "Abort" or Close button.		* Close DreamDFU.exe by clicking on "Abort" or Close button.
	* HX3.5 will revert to MIDI over USB mode.		* HX3.5 will revert to MIDI over USB mode.
			* Click on "Close" in the HX3.5 Editor window, then "Open" to re-establish the MIDI over USB connection.

Bovist am 24. August 2018 um 12:44 Uhr

2018-08-24T12:44:33Z

← Nächstältere Version		Version vom 24. August 2018, 12:44 Uhr
Zeile 3:		Zeile 3:
	'''Preliminary'''		'''Preliminary'''

	While organ sound generation is done entirely in hardware (FPGA), the HX3.5 board uses an additional Digital Signal Processor (DSP) for reverb effects (EFX) and General MIDI voice generation. 128 GM sounds are installed as a so-called soundbank. Up to two soundbanks can be installed at a time; with an extended HX3 licence, a second soundbank may contain additional, more ~~sophisticated~~ instruments (with same MIDI GM bank and program numbers) which replace the instruments in first soundbank.		While organ sound generation is done entirely in hardware (FPGA), the HX3.5 board uses an additional Digital Signal Processor (DSP) for reverb effects (EFX) and General MIDI voice generation. 128 GM sounds are installed as a so-called soundbank. Up to two soundbanks can be installed at a time; with an extended HX3 licence, a second soundbank may contain additional, more elaborated instruments (with same MIDI GM bank and program numbers) which replace the instruments in first soundbank.

	At this time, the DSP firmware and DSP soundbank(s) cannot be updated by SD Card; use USB connection to PL3 or HX3.5 instead. Please follow instructions below carefully.		At this time, the DSP firmware and DSP soundbank(s) cannot be updated by SD Card; use USB connection to PL3 or HX3.5 instead. Please follow instructions below carefully. The DSP update package consists of the following files:

			* DSP Updater (file DreamDfu.exe for Windows, update by USB connection)
			* DSP firmware (file HX35_5504-FW_xxxx.dfu with Reverb and GM synth sound generation)
			* DSP default sound bank (file GMBK5X64_0x8008.dfu, default GM soundbank for DSP GM synth)
			* DSP additional sound bank (file xxxx_0x8050.dfu, refined additional instruments for DSP GM synth)

	==Preparation==		==Preparation==

Bovist: /* Firmware Update by USB */

2018-07-17T13:46:53Z

Firmware Update by USB

← Nächstältere Version		Version vom 17. Juli 2018, 13:46 Uhr
Zeile 22:		Zeile 22:
	* HX3.5 will show "DSP update (DFU)" on MenuPanel display.		* HX3.5 will show "DSP update (DFU)" on MenuPanel display.
	* Start '''DreamDFU.exe''' and open DSP firmware file "HX35_5504-FW.dfu". '''DreamDFU.exe''' should show a window as seen in picture.		* Start '''DreamDFU.exe''' and open DSP firmware file "HX35_5504-FW.dfu". '''DreamDFU.exe''' should show a window as seen in picture.
	* Click "Update Device". A progress bar will indicate update ~~process~~.		* Click "Update Device". A progress bar will indicate the update progress.
	* ~~Close~~ DreamDFU.exe by clicking on "Abort" or Close button.		* When finished, close DreamDFU.exe by clicking on "Abort" or Close button.
	* HX3.5 will revert to MIDI over USB mode.		* HX3.5 will revert to MIDI over USB mode.