HX3.5 Main page: Unterschied zwischen den Versionen

Aus KeyboardPartner Wiki
Zur Navigation springenZur Suche springen
(31 dazwischenliegende Versionen von 2 Benutzern werden nicht angezeigt)
Zeile 1: Zeile 1:
[[Datei:HX35_0.JPG|400px|thumb|right|'''HX3 mk5 mainboard''']]
[[Datei:HX35_0.JPG|400px|thumb|right|'''HX3 mk5 mainboard''']]


== Vorläufig==
== Preface ==


=== Features ===
=== Features ===


HX5.5 (HX3 mk5) ist das Folgemodell des bekannten HX3 mk4 Boards. Bei gleicher Größer und unverändertem Preis bietet es höhere Performance und mehr Flexibilität aufgrund der Ausstattung mit einem größeren XILINX FPGA-Chip der 6. Generation (3-mal so viel Gatter wie der FPGA-Chip der 3. Generation auf dem HX3.4). Die Anschlüsse sind weitgehend kompatibel mit denen des HX3 mk4, daher kann HX3.5 den Vorgänger in vielen Applikationen ersetzen.
HX3.5 (HX3 mk5) is the follow-up model of the well-known HX3 mk4 board. While maintaining size and cost, it offers higher performance and more flexibilty by using a larger 6th generation XILINX FPGA (3 times more gates than 3rd Generation FPGA on HX3.4). Connectors are mostly compatible with HX3 mk4, so HX3.5 will be a drop-in replacement for many applications.


Optional (mit Extended Licence) ist der neue HX3 RealOrgan Klanggenerator imstande, alle elektromagnetischen Orgeln nachzubilden, inklusive der berühmten H100, dazu Combo-Orgeln und Konzertorgeln der 70er und 80er Jahre wie Böhm Orchester und Wersi Helios. Er erzeugt bis zu 15 Harmonische und ermöglicht bis zu 12 Zugriegel pro Manual mit individuellen Mixturen, inklusive Phasing Rotor (WersiVoice). Mechanische und elektronische Tastung kann simultan genutzt werden. Auf allen Zugriegeln sind ADSR-Hüllkurven verfügbar, außerdem H100- Perkussion sowie „Harp Sustain“. Diverse Tongenerator-Wellenformen stehen zur Auswahl, für „käsige“ Combo-Orgeln ebenso wie für die klangstarken Konzertorgeln.
As an option (extended licence required), the new HX3 mk5 engine is capable of emulating all electromagnetic organs including H100, combo organs, several concert organs of the 70s and 80s like Böhm Orchester and Wersi Helios. This implies up to 15 harmonics, up to 12 drawbars per manual with individual mixtures, including phasing rotor (WersiVoice), mechanical and electronic keying available simultaneously. ADSR envelope available on all drawbars, also H100 percussion and "Harp Sustain". New tone generator switchable from tonewheel to TOS (top octave synthesizer) or single note mode, loadable generator waveforms for "cheesy" combo organs as well as fully fledged concert organs.


In vielen Details ist HX3.5 kompatibel mit dem älteren HX3.4 Board (die meisten Peripherie-Anschlüsse, Pinout der Steckverbinder, mechanische Dimensionen). Allerdings gibt es zusätzliche Anschlüsse und die Nummerierung hat sich geändert. Eine neuer Editor verschafft Zugang zu den Parametern, deren Zahl drastisch gewachsen ist.
In many respects, HX3.5 is compatible with the older HX3.4 board (most peripherals, header pinout, mechanical dimensions). However, there are additional connectors, also the connector lettering has changed. A new Editor application is providing access to the vastly increased HX3.5 parameter count.


=== Technische Daten ===
'''HX3.5 components are meant to be installed by a skilled technician. Basic IT knowledge is mandatory since software has to be installed and configurated in some cases.'''


'''Größe:''' 200 x 100 mm
=== Technical Data ===


'''Stromversorgung:''' 5V/400mA or 9-12V/300mA (ohne Peripherie)
'''Size:''' 200 x 100 mm


'''Klangerzeugung:''' HX3 RealOrgan Sound Engine, Hardware-Emulation (Physical Modeling) durch FPGA der 6. Generation. 61 Töne auf Ober-/Untermanual ebenso wie Pedal. 15 Harmonische pro Taste, Hammond-typische Perkussion auf allen Harmonischen. Tastung auf allen Harmonischen wählbar zwischen "mechanisch" (Hammond-typische Tastenkontakte) oder elektronisch (LSI/Transistororgeln). Elektronische Tastung nutzt separate Hüllkurven (ADSR) für jede Harmonische und jede Taste (915 ADSR/VCA-Schaltkreise pro Manual).
'''Power Supply:''' 5V/400mA or 9-12V/300mA (without peripherals)


Quadcore-DSP mit 64 MByte Sample-Speicher für Hall/EFX und 128 General-MIDI-Stimmen (GM2), Auswahl von 24 Stimmen als Presets verfügbar. 81-fach polyphon.  
'''Sound generation:''' HX3 mk5 Sound Engine, hardware emulation (physical modeling) by 6th generation FPGA. 61 keys on upper/lower manual as well as pedal. 15 harmonics per key, Hammond-type percussion on all harmonics. Keying of each harmonic selectable to "mechanical" (Hammond-type key contacts) or electronic gating (LSI/transistor organs). Electronic gating uses separate ADSR circuit for each harmonic and each key (915 ADSR/VCA circuits per manual).  


'''Anschlüsse:''' 6,3mm-Buchse für Fußschalter, 6,3mm-Buchse für Schwellerpedal (Yamaha FC-7 oder ähnlich), DIN-5-pol. MIDI IN, MIDI IN/OUT, DC-Buchse für 5V- oder 9V-Steckernetzteil min. 500mA, 6,3mm-Buchsen für  Stereo-Audioausgang. USB-B-Buchse mitgeliefert (bei Bedarf einzulöten). Anschlüsse auf dem Board für bis zu 24 Zugriegel/Potentiometer (erweiterbar auf bis zu 64 Zugriegel/Potentiometer), 16 Taster (erweiterbar auf bis zu 64 Taster), 6-fach Vibrato-Drehschalter, I2C Bussystem für Menüpanel und Anschluss von Preset-Boards (kompatibel mit unseren Preset12-2- und Preset16-Boards).
Quad core DSP with 64 MByte sample memory for reverb/efx and 128 GM2 voices, choice of 24 voices available. 81-note polyphony.  


== Documents & Manuals ==
'''Connections:''' 1/4" jack footswitch, 1/4" jack Swell pedal  (Yamaha FC-7 or similar), DIN-5pin MIDI IN, MIDI IN/OUT, DC jack 5V or 9V wallwart power supply min. 500mA, 1/4" jacks for stereo audio output, USB MIDI jack (must be soldered in place if needed). Connectors for up to 24 drawbars/pots on board (extendable to 64 drawbars/pots), 16 buttons (extendable to 64 buttons), 6-position Vibrato rotary switch, I2C bus system for MenuPanel and Preset board connection (compatible to our Preset12-2 and Preset16 boards).


'''[[HX3.5 Backgrounder]]''' In-depth information about HX3 RealOrgan Sound Engine<br>
== Documents, Updates & Manuals ==
 
'''[[HX3.5 Backgrounder]]''' In-depth information about HX3 mk5 resp. Böhm RealOrgan Sound Engine<br>
'''[[HX3.5 Installation Manual]]''' Mainboard hardware installation<br>
'''[[HX3.5 Installation Manual]]''' Mainboard hardware installation<br>
'''[[HX3.5 Extension Board]]''' Installation<br>
'''[[HX3.5 Extension Board]]''' Installation<br>
'''[[HX3.5 User Manual]]''' Menu system, external connections<br>
'''[[Using HX3 with MIDI controllers]]''' - HX3 MIDI implementation charts for all MIDI CC sets<br>
'''[[HX3.5 Editor User Manual]]''' for altering parameters, update transfers and finalizing<br>
'''[[HX3.5 SD Card Usage]]''' Updating Controller firmware and FPGA sound engine using SD card adaptor<br>
'''[[HX3.5 SD Card Usage]]''' Updating Controller firmware and FPGA sound engine using SD card adaptor<br>
'''[[HX3.5 DSP Updates]]''' Updating Sound Banks and DSP firmware<br>


'''[[Using HX3 with MIDI controllers]]''' - HX3 MIDI implementation charts for all MIDI CC sets
'''[https://updates.keyboardpartner.de/Files/Manuals%20%28Anleitungen%29/UserManual_mainboard.pdf HX3.5 Mainboard User Manual, printable PDF file]'''<br>
'''[https://updates.keyboardpartner.de/Files/Manuals%20%28Anleitungen%29/UserManual_MIDI_Expander.pdf HX3.5 MIDI Expander User Manual, printable PDF file]'''<br>
'''[https://updates.keyboardpartner.de/Files/Manuals%20%28Anleitungen%29/UserManual_DrawbarExpander.pdf HX3.5 Drawbar Expander User Manual, printable PDF file]'''<br>
'''[https://updates.keyboardpartner.de/Files/Manuals%20%28Anleitungen%29/UserManual_HX35_Editor.pdf HX3.5 Editor User Manual, printable PDF file]''' for altering parameters, update transfers and finalizing<br>
 
'''[https://updates.keyboardpartner.de HX3.5 Files Page]''' Most recent updates, manuals, schematics and tools<br>
 
[[Datei:hx35_r11r17.JPG|400px|thumb|right|'''HX3 mk5 Modification''']]
 
===Important===


== Dokumente und Anleitungen (deutsch) ==
First lot of HX3.5 boards have been delivered with two obsolete USB data line damping resistors '''R11 and R17''' in place, value 22 Ohms (22R marking, SMT 0805 size). Please replace both with '''zero Ohm resistors or bridge each with solder blob'''. R11 and R17 can be found near SAM5504 DSP. Send us your board for a free repair if you don't want to do this by yourself.


'''[[HX3.5 Editor Bedienungsanleitung]]''' für Parametereinstellung, Updates und Finalisierung<br>
With these resistors in place, you may experience USB communication problems (especially when using USB on HX3.5 Extension Board), and probably HX3.5 will not be recognized when using a USB hub. '''If the latter is the case, your device definitely belongs to this particular lot.'''
'''[[HX3.5 Verwendung von SD Karten]]''' Updaten der Firmware und Sound Engine über SD-Karte<br>
'''[[HX3.5 DSP-Updates]]''' Updaten der Sound-Bänke und DSP-Firmware<br>

Version vom 28. Januar 2019, 23:25 Uhr

HX3 mk5 mainboard

Preface

Features

HX3.5 (HX3 mk5) is the follow-up model of the well-known HX3 mk4 board. While maintaining size and cost, it offers higher performance and more flexibilty by using a larger 6th generation XILINX FPGA (3 times more gates than 3rd Generation FPGA on HX3.4). Connectors are mostly compatible with HX3 mk4, so HX3.5 will be a drop-in replacement for many applications.

As an option (extended licence required), the new HX3 mk5 engine is capable of emulating all electromagnetic organs including H100, combo organs, several concert organs of the 70s and 80s like Böhm Orchester and Wersi Helios. This implies up to 15 harmonics, up to 12 drawbars per manual with individual mixtures, including phasing rotor (WersiVoice), mechanical and electronic keying available simultaneously. ADSR envelope available on all drawbars, also H100 percussion and "Harp Sustain". New tone generator switchable from tonewheel to TOS (top octave synthesizer) or single note mode, loadable generator waveforms for "cheesy" combo organs as well as fully fledged concert organs.

In many respects, HX3.5 is compatible with the older HX3.4 board (most peripherals, header pinout, mechanical dimensions). However, there are additional connectors, also the connector lettering has changed. A new Editor application is providing access to the vastly increased HX3.5 parameter count.

HX3.5 components are meant to be installed by a skilled technician. Basic IT knowledge is mandatory since software has to be installed and configurated in some cases.

Technical Data

Size: 200 x 100 mm

Power Supply: 5V/400mA or 9-12V/300mA (without peripherals)

Sound generation: HX3 mk5 Sound Engine, hardware emulation (physical modeling) by 6th generation FPGA. 61 keys on upper/lower manual as well as pedal. 15 harmonics per key, Hammond-type percussion on all harmonics. Keying of each harmonic selectable to "mechanical" (Hammond-type key contacts) or electronic gating (LSI/transistor organs). Electronic gating uses separate ADSR circuit for each harmonic and each key (915 ADSR/VCA circuits per manual).

Quad core DSP with 64 MByte sample memory for reverb/efx and 128 GM2 voices, choice of 24 voices available. 81-note polyphony.

Connections: 1/4" jack footswitch, 1/4" jack Swell pedal (Yamaha FC-7 or similar), DIN-5pin MIDI IN, MIDI IN/OUT, DC jack 5V or 9V wallwart power supply min. 500mA, 1/4" jacks for stereo audio output, USB MIDI jack (must be soldered in place if needed). Connectors for up to 24 drawbars/pots on board (extendable to 64 drawbars/pots), 16 buttons (extendable to 64 buttons), 6-position Vibrato rotary switch, I2C bus system for MenuPanel and Preset board connection (compatible to our Preset12-2 and Preset16 boards).

Documents, Updates & Manuals

HX3.5 Backgrounder In-depth information about HX3 mk5 resp. Böhm RealOrgan Sound Engine
HX3.5 Installation Manual Mainboard hardware installation
HX3.5 Extension Board Installation
Using HX3 with MIDI controllers - HX3 MIDI implementation charts for all MIDI CC sets
HX3.5 SD Card Usage Updating Controller firmware and FPGA sound engine using SD card adaptor

HX3.5 Mainboard User Manual, printable PDF file
HX3.5 MIDI Expander User Manual, printable PDF file
HX3.5 Drawbar Expander User Manual, printable PDF file
HX3.5 Editor User Manual, printable PDF file for altering parameters, update transfers and finalizing

HX3.5 Files Page Most recent updates, manuals, schematics and tools

HX3 mk5 Modification

Important

First lot of HX3.5 boards have been delivered with two obsolete USB data line damping resistors R11 and R17 in place, value 22 Ohms (22R marking, SMT 0805 size). Please replace both with zero Ohm resistors or bridge each with solder blob. R11 and R17 can be found near SAM5504 DSP. Send us your board for a free repair if you don't want to do this by yourself.

With these resistors in place, you may experience USB communication problems (especially when using USB on HX3.5 Extension Board), and probably HX3.5 will not be recognized when using a USB hub. If the latter is the case, your device definitely belongs to this particular lot.