HX3.5 Editor User Manual: Unterschied zwischen den Versionen

Aus KeyboardPartner Wiki
Zur Navigation springenZur Suche springen
KKeine Bearbeitungszusammenfassung
 
(118 dazwischenliegende Versionen desselben Benutzers werden nicht angezeigt)
Zeile 1: Zeile 1:
==Preface==
[[Datei:HX35_Editor_510b.png|600px|thumb|right|'''HX3.5 Editor with Tab/Drawbar window open''']]


'''HX3.5 Editor''' is a tool for adjusting HX3.5 parameters and setups. Compared to '''HX3.4 Remote''', number of tweakable parameters have been vastly increased (more than 800), so a new design was necessary. HX3.5 Editor connects to HX3.5 mainboard by a USB-to-serial adaptor cable FT232R-5V (available in our shop) or a USB-to-serial adaptor circuit with FTDI interface chip.  
HX3.5 Editor now is part of the '''HX3.5 Manager''' package. A complete user manual is available as PDF for download '''[https://updates.keyboardpartner.de/Files/Manuals%20%28Anleitungen%29/UserManual_HX35_Manager.pdf on our Update Server]'''.


Sorry, only Windows version available (Windows XP and up). '''A version to connect by MIDI over USB is planned.'''
See also the '''[http://keyboardpartner.remotewebaccess.com/Files HX3.5 Files Page]''' for most recent updates, manuals, schematics and tools.
 
==Installation==
 
No installation is necessary. Just make sure all files contained in HX3.5 Editor ZIP file are copied to a folder on your local harddisk. Main parameter table and dropdown lists are defined in .INI text files which must be present in same folder as HX3.5 application.
 
==Connection==
 
Attach USB-to-serial adaptor cable FT232R-5V to any PC USB port and HX3.5 '''6-pin header PL19''', black wire (BK) facing to black header PL17. On first install, Windows will install FTDI drivers automatically (Win XP needs manual FTDI driver installation). Power up HX3.5, Open HX3.5 Editor application and click on "Connect". A dialog window will appear which asks for the FTDI device to use. Select '''FT232R''' entry and click OK. HX3.5 Editor will wait for communication established and reads all parameters from HX3.5 mainboard. Log window will show all activities as well as (plain text) answers from HX3.5 mainboard.
 
==Editing Parameters==
 
The main table lists all 800+ editable HX3.5 parameters. An active "range" is marked by green parameters. To find a particular parameter range, click on corresponding button in "Jump to Param Group in List" bevel. These buttons just search for the respective item line, nothing else. Click on parameter line you want to edit.
 
A '''help text''' for selected parameter appears on right bottom of main window. Depending on type of parameter, either an editable scroll bar, an ON/OFF button or a dropdown list appears on parameter line. Some parameters do not have a special visual control, just the number itself.
 
Click on  teal colored "Get Range" button to refresh values from HX3.5 board (e.g. to display current drawbar setting). "Set Range" will send whole range to HX3.5 (usually not necessary since parameter uplink is always "live").
 
Changes to parameters are executed instantly, but they are temporary until you save their parameter range. Save destination is dependant on type of parameter (see color coding at right bottom of main window).
 
==Testing Controls==
 
Parameter display will not update until you click "Get Range" or "Get all Params". Click green "Start Events" button to enable live update of displayed parameters (when it's range is visible in main table, data will change instantly). HX3.5 mainboard sends an "event" to the editor when it detects a change of any analog or digital control. The Log Window will show each event. If an analog input is floating (not connected), it is likely you will get random data on a particular parameter number. Click "Stop Events" to cancel live parameter updates.

Aktuelle Version vom 13. Februar 2021, 15:56 Uhr

HX3.5 Editor with Tab/Drawbar window open

HX3.5 Editor now is part of the HX3.5 Manager package. A complete user manual is available as PDF for download on our Update Server.

See also the HX3.5 Files Page for most recent updates, manuals, schematics and tools.